相关论文: Automatic Analog Beamforming Transceiver for 60 GH…

We present a distributed antenna array supporting open-loop distributed beamforming at 1.5 GHz. Based on a scalable, high-accuracy internode ranging technique, we demonstrate open-loop beamforming experiments using three transmitting nodes.…

Consider a MIMO interference channel whereby each transmitter and receiver are equipped with multiple antennas. The basic problem is to design optimal linear transceivers (or beamformers) that can maximize system throughput. The recent work…

In bi-static Ambient Backscatter Communications (AmBC) systems, the direct path from the ambient source to the receiver can be several orders of magnitude stronger than the scattered path modulated by the AmBC device. Because of the large…

We propose a hybrid architecture that integrates RF (i.e., sub-6 GHz) and millimeter wave (mmWave) technologies for 5G cellular systems. In particular, communications in the mmWave band faces significant challenges due to variable channels,…

In this paper we describe the status of the first prototype of the 60 GHz wireless Multi-gigabit data transfer topology currently under development at University of Heidelberg using IBM 130 nm SiGe HBT BiCMOS technology. The 60 GHz band is…

This paper presents the realization of a wireless Gigabit Ethernet communication system operating in the 60 GHz band. The system architecture uses a single carrier modulation. A differential encoded binary phase shift keying modulation and…

This paper presents the design and performance analysis of a 1x6 linear microstrip patch antenna array tailored for automotive radar and 5G millimetre-wave (mm-wave) applications. The proposed antenna array comprises six rectangular…

To circumvent the high path loss of mmWave propagation and reduce the hardware cost of massive multiple-input multiple-output antenna systems, full-dimensional hybrid beamforming is critical in 5G and beyond wireless communications.…

The beamforming technology with large holographic antenna arrays is one of the key enablers for the next generation of wireless systems, which can significantly improve the spectral efficiency. However, the deployment of large antenna…

Hybrid beamforming is key to achieving energy-efficient 5G wireless networks equipped with massive amount of antennas. Low-resolution data converters bring yet another degree of freedom to energy efficiency for the state-of-the-art 5G…

Massive antenna arrays form physically large apertures with a beam-focusing capability, leading to outstanding wireless power transfer (WPT) efficiency paired with low radiation levels outside the focusing region. However, leveraging these…

Massive multiple-input multiple-output (MIMO) avails of simple transceiver design which can tackle many drawbacks of relay systems in terms of complicated signal processing, latency, and noise amplification. However, the cost and circuit…

A 16-element, compact phased array transceiver is demonstrated at E-band (71-76 and 81-86GHz). A Weaver image selection architecture reduces the LO tuning range to 3GHz while covering the 10GHz band. The bidirectional and efficient…

Although the hardware complexity of the analog self-interference canceller in full duplex Multiple Input Multiple Output (MIMO) designs does not necessarily scale with the number of transceiver antennas, exploiting the benefits of analog…

To achieve high data rates defined in 5G, the use of millimeter-waves and massive-MIMO are indispensable. To benefit from these technologies, an accurate estimation of the channel parameters is crucial. We propose a novel two-stage…

Millimeter-wave (mm-wave) communication is a key technology for future wireless networks. To combat significant path loss and exploit the abundant mm-wave spectrum, effective beamforming is crucial. Nevertheless, conventional fully digital…

In this paper, linear beamforming design for amplify-and-forward relaying cellular networks is considered, in which base station, relay station and mobile terminals are all equipped with multiple antennas. The design is based on minimum…

This paper proposes a dual-band reconfigurable antenna array (DBRAA), enabling wireless capabilities in both sub-6 GHz (sub-6G) and millimeter wave (mmWave) bands using a single array. For the sub-6G band, we propose a reconfigurable…

Millimeter wave offers a sensible solution to the capacity crunch faced by 5G wireless communications. This paper comprehensively studies physical layer security in a multi-input single-output (MISO) millimeter wave system where multiple…

In this paper, we propose a beamforming method for the calibration of the direction-independent gain of the analog chains of aperture arrays. The gain estimates are obtained by cross-correlating the output voltage of each antenna with a…