相关论文: Markov Property of Continuous Dislocation Band Pro…

The Portevin-Le Chatelier(PLC) effect has been investigated by deforming Al-2.5%Mg alloy in the strain rate regime where simultaneously two types (type B and type A) of serrations appear in the stress strain curve. Our analysis reveal that…

The plastic deformation of dilute alloys is often accompanied by plastic instabilities due to dynamic strain aging and dislocation interaction. The repeated breakaway of dislocations from and their recapture by solute atoms leads to stress…

Tensile tests were carried out by deforming polycrystalline samples of Al-2.5%Mg alloy at four different temperatures in an intermediate strain rate regime of 2x10-4s-1 to 2x10-3s-1. The Portevin-Le Chatelier (PLC) effect was observed…

The scaling behavior of the Portevin-Le Chatelier (PLC) effect was studied by deforming Al-2.5%Mg alloy for a wide range of strain rates. To reveal the exact scaling nature, the time series data of true stress vs. time, obtained during…

Experimental time series obtained from single and poly-crystals subjected to a constant strain rate tests report an intriguing dynamical crossover from a low dimensional chaotic state at medium strain rates to an infinite dimensional power…

The plastic deformation of metal alloys localizes in the Portevin--Le Chatelier effect in bands of different types, including propagating, or type 'A' bands, usually characterised by their width and a typical propagation velocity. This…

Tensile tests were carried out by deforming polycrystalline samples of Al-2.5%Mg alloy at room temperature in a wide range of strain rates where the Portevin-Le Chatelier (PLC) effect was observed. The experimental stress-time series data…

Tensile tests have been carried out by deforming polycrystalline samples of substitutional Al-2.5%Mg alloy at room temperature at a range of strain rates. The Portevin - Le Chatelier (PLC) effect was observed. From an analysis of the…

The scaling behavior of the Portevin-Le Chatelier (PLC) effect is studied by deforming a substitutional alloy, Al-2.5%Mg and an interstitial alloy, low carbon steel (0.15%C, 0.33%Mn, 0.04%P, 0.05%S, 0.15%Si and rest Iron) at room…

A simplified 3D FE model based on McCormick's model is developed to numerically predict the spatiotemporal behaviors of the PLC effect in Ti-12Mo alloy tensile tests at 350 degrees C with strain rates from the order of $10^{-4}$ s$^{-1}$ to…

The Portevin-Le Chatelier (PLC) effect is a kind of plastic instability observed in many dilute alloys when deformed at certain ranges of strain rate and temperature. In this letter we establish that the dynamical process responsible for…

The complexity of the Portevin-Le Chatelier effect in Al-2.5%Mg polycrystalline samples subjected to uniaxial tensile tests is quantified. Multiscale entropy analysis is carried out on the stress time series data observed during jerky flow…

Tensile tests were carried out by deforming polycrystalline samples of an interstitial alloy, low carbon steel at room temperature in a wide range of strain rates where the Portevin-Le Chatelier (PLC) effect was observed. The observed…

Scale invariant power law distributions for acoustic emission signals are ubiquitous to several plastically deforming materials. However, power law distributions for the acoustic emission energies are reported in distinctly different…

We present a continuous time random walk model for the Portevin-Le Chatelier (PLC) effect. From our result it is shown that the dynamics of the PLC band can be explained in terms of the Levy Walk.

The influence of the surface pre-deformation on jerky flow caused by the Portevin-Le Chatelier (PLC) effect was investigated using flat tensile specimens of an Al-Mg alloy. Although jerky flow represents a macroscopic plastic instability,…

We investigate the Portevin-Le Chatelier effect (PLC), by compressing Al-Mg alloys in a very large deformation range, and interpret the results from the viewpoint of phase transitions and critical phenomena. The system undergoes two…

Many new applications of ferroelastic materials require a better understanding of their dynamics that often involve phase transformations. In such cases, an important prerequisite is the understanding of wave propagation caused by…

Matallic alloys, such as Al or Cu, or mild steel, display plastic instabilities in a well defined range of temperatures and deformation rates, a phenomenon known as the Portevin-Le Chatelelier (PLC) effect. The stick-slip behavior, or…

Metallic materials under high stress often exhibit deformation localization, manifesting as slip banding. Over seven decades ago, Frank and Read introduced the well-known model of dislocation multiplication at a source, explaining slip band…