相关论文: Thermal stability of n-dodecane : experiments and …

In order to better understand the thermal decomposition of polycyclanes, the pyrolysis of tricyclodecane has been studied in a jet-stirred reactor at temperatures from 848 to 933 K, for residence times between 0.5 and 6 s and at atmospheric…

The thermal decomposition of norbornane (dissolved in benzene) has been studied in a jet stirred reactor at temperatures between 873 and 973 K, at residence times ranging from 1 to 4 s and at atmospheric pressure, leading to conversions…

In a scramjet, the fuel can be used to cool down the engine walls. The thermal decomposition of the jet fuel changes the reacting mixture before its combustion. A numerical study of the pyrolysis of norbornane, a jet fuel surrogate, has…

This paper presents an experimental and modeling study of the oxidation of large linear akanes (from C10) representative from diesel fuel from low to intermediate temperature (550-1100 K) including the negative temperature coefficient (NTC)…

High temeperature (900-1000\degree C) low pressure (<< 1 atm) pyrolysis of propane yields a pyrocarbon deposit, but also mainly hydrogen and hydrocarbons from methane to polyaromatics. 30 reaction products were exeperimentally quantified at…

To better understand the chemistry involved during the combustion of components of diesel fuel, the structure of a laminar lean premixed methane flame doped with n-butylbenzene has been investigated. The inlet gases contained 7.1% (molar)…

In order to better understand the chemistry involved during the combustion of components of diesel fuel, the structure of a laminar lean premixed methane flame doped with indane has been investigated. The gases of this flame contains 7.1%…

Utilization of liquid fuels is crucial to enabling commercialization of rotating detonation engines in the near future. In this study, Eulerian-Lagrangian simulations are conducted for rotating detonative combustion with dilute n-heptane…

The last years saw a renewal of interest for hypersonic research in general and regenerative cooling specifically, with a large increase of the number of dedicated facilities and technical studies. In order to quantify the heat transfer in…

In line with the studies presented in the parts I and II of this paper, the structure of a laminar rich premixed methane flame doped with cyclopentene has been investigated. The gases of this flame contains 15.3% (molar) of methane, 26.7%…

In the context of the search for gasoline surrogates for kinetic modeling purpose, this paper describes a new model for the low-temperature auto-ignition of n-heptane/iso-octane/hexene/toluene blends for the different linear isomers of…

Experiments and numerical simulations were carried out in order to contribute to a better understanding and prediction of high-pressure injection into a gaseous environment. Specifically, the focus was put on the phase separation processes…

N-carbophenes are a class of two-dimensional covalent organic frameworks with potential for solid-state gas storage and as 2D topological materials. Previous studies have demonstrated that variations in their bonding, topology, and…

For a better modeling of the importance of the different channels leading to the first aromatic ring, we have compared the structures of laminar rich premixed methane flames doped with several unsaturated hydrocarbons: allene and propyne,…

Autoignition delay times have been measured in a rapid compression machine at Lille at temperatures after compression from 630 to 840 K, pressures from 8 to 14 bar, \Phi = 1 and for a iso octane/1 hexene mixture containing 82% iso-octane…

In order to better understand the importance of the different channels leading to the first aromatic ring, we have investigated, the structure of a laminar rich premixed methane flame doped with several unsaturated hydrocarbons: allene and…

Using molecular dynamics simulation, we present a comprehensive study of the volatile thermal degradation of high-density polyethylene (HDPE) across a temperature range of 300 K to 1823 K. We find that degradation at temperatures higher…

Ignition delay times of cyclopentene-oxygen-argon mixtures were measured behind reflected shock waves. Mixtures contained 0.5 or 1 % of hydrocarbons for equivalence ratios ranging from 0.5 to 1.5. Reflected shock waves conditions were:…

Investigating properties of phase change materials (PCMs) is an important issue due to their extensive use in heat storage systems and thermal regulation devices. Improvement of the efficiency of such systems should be based on a better…

This paper describes how automatically generated detailed kinetic mechanisms are obtained for the oxidation of alkanes and how these models could lead to a better understanding of autoignition and cool flame risks at elevated conditions.…