相关论文: Reversed flow at low frequencies in a microfabrica…

Precise manipulation of fluids and objects on the micro scale is seldom a simple task, but nevertheless crucial for many applications in life sciences and chemical engineering. We present a microfluidic chip fabricated in silicon-glass,…

We measure the rectified dc currents resulting when a 3-terminal semiconductor device with gate-dependent conductance is driven with an ac gate voltage. The rectified currents exhibit surprisingly complex behaviour as the dc source-drain…

With the aim to parallelize and monitor biological or biochemical phenomena, trapping and immobilization of objects such as particles, droplets or cells in microfluidic devices has been an intense area of research and engineering so far.…

We have developed and characterized two novel micro flow sensors based on measuring the electrical impedance of the interface between the flowing liquid and metallic electrodes embedded on the channel walls. These flow sensors are very…

Inexpensive, portable lab-on-a-chip devices would revolutionize fields like environmental monitoring and global health, but current microfluidic chips are tethered to extensive off-chip hardware. Insects, however, are self-contained and…

The tendency for flows in microfluidic systems to behave linearly poses a challenge for designing integrated flow control schemes to carry out complex fluid processing tasks. This hindrance has led to the use of numerous external control…

Electrokinetic flow can be generated as a highly coupled phenomenon among velocity field, electric conductivity field and electric field. It can exhibit different responses to AC electric fields in different frequency regimes, according to…

This paper details the development of an integrated AC electro-osmotic (ACEO) microfluidic pump for dilute electrolytes consisting of a long serpentine microchannel lined with three dimensional (3D) stepped electrode arrays. Using low AC…

Flow-based microfluidic biochips are widely used in lab- on-a-chip experiments. In these chips, devices such as mixers and detectors connected by micro-channels execute specific operations. Intermediate fluid samples are saved in storage…

An ion-exchange-resin-based microfluidic pump is introduced that utilizes trace amounts of ions to generate fluid flows. We show experimentally that our pump operates in almost deionized water for periods exceeding 24h and induces fluid…

Microfluidics, the study of fluids in microscopic channels, has led to important advances in fields as diverse as microelectronics, biotechnology and chemistry. Microfluidic research is primarily based on the use of microfluidic chips,…

Pumping of electrons through nano-scale devices is one of the fascinating achievements in the field of nano-science with a wide range of applications. To optimize the performance of pumps, operating them at high frequencies is mandatory. We…

Hydropower is an important source of renewable energy that provides clean energy. Pump-turbine type hydraulic turbine is widely used to mitigate the intermittent energy demand and store a large-scale energy. Pump-turbine operates in reverse…

It is demonstrated that non-resonant wave front reversal (WFR) of spin-wave pulses caused by pulsed parametric pumping can be effectively used for microwave signal processing. When the frequency band of signal amplification by pumping is…

Inverse design in photonics has gathered increasing attention as a powerful approach that goes beyond the intuition-based designs. In this Letter, we present the inverse design and experimental demonstration of compact optical cloaks at…

Accurate and integrable control of different flows within microfluidic channels is crucial to further development of lab-on-a-chip and fully integrated adaptable structures. Here we introduce a flexible microactuator that buckles at a high…

A well-characterised sample of silicon tunable-barrier electron pump has been operated at a frequency of 2 GHz using a custom drive waveform, generating a pump current of 320 pA. Precision measurements of the current were made as a function…

The work concerns the spectral, entropy and bifurcation analysis of the dynamics of a reverse-flow system. The existence of chaotic oscillations was demonstrated in a wide range of changes in the parameters of the model. The model of such a…

Electrical impedance tomography with fully integrated microfluidics and electronics is presented for the first time in a CMOS chip. Chambers and electrodes are fabricated in the interconnect layers of a 65 nm CMOS chip through…

We report on experiments that consist in deforming a collection of monodisperse droplets produced by a microfluidic chip through a flow-focusing device. We show that a proper numerical modelling of the flow is necessary to access the stress…