相关论文: The Effect of Annealing Temperature on Statistical…

This investigation deals with the effect of annealing temperature on the structural, topographical and optical properties of Zinc Oxide thin films prepared by sol gel method. The structural properties were studied using X-ray diffraction…

This paper presents the effect of different cooling rate after annealing on structural and electrical properties of TiO2 thin films. Titanium dioxide thin film was deposited on a silicon substrate using DC magnetron technique. After…

The effect of thermal annealing on wurtzite ZnO, terminated by two surfaces, (0 0 0 $\bar 1$) (which is oxygen-terminated) and (0 0 0 1) (which is Zn-terminated), is investigated via molecular dynamics simulation using reactive force field…

In the present work, HfO2 thin film (100nm) has been deposited by sputtering technique and annealed at various temperatures ranging from 400 to 1000\degree (in step of 200 \degree) in O2 ambient for 10 min. The samples have been…

A comparative study of the physical properties of undoped Zinc Oxide (ZnO) and Al doped Zinc Oxide (AZO) thin films were performed as a function of annealing temperature. The structural properties were analyzed using X-ray diffraction and…

Ferroelectricity in sputtered undoped-HfO$_2$ is attractive for composition control for low power and non-volatile memory and logic applications. Unlike doped HfO$_2$, evolution of ferroelectricity with annealing and film thickness effect…

The effect of annealing under a magnetic field on the microstructure and properties of YNixMn1-xO3 (x=0.33 and 0.5) films has been investigated. It is found that the ferromagnetic transition temperature is significantly enhanced after post…

We study the effects of time-dependent substrate/film temperature in the deposition of a mesoscopically thick film using a statistical model that accounts for diffusion of adatoms without lateral neighbors whose coefficients depend on an…

The effects of post-synthesis annealing temperature on arc-melted samples of Fe$_{3}$Ga$_{4}$ has been studied to investigate changes in crystallographic and magnetic properties induced by annealing. Results show a significant trend in the…

Further development of nuclear power plant technology relies heavily on materials durability under operating conditions. Estimating the materials performance in the operando tests is crucial. In this paper, the mechanical behavior of thin…

In this study, we achieved the improvement of uniaxial perpendicular magnetic anisotropy (PMA) in the W/MgAl2O4/CoFeMnSi/W/CoFeMnSi/MgAl2O4/W heterostructure by manipulating the annealing temperature (TA) [350 C, 450 C, and 550 C]. We…

In this work, the effects of thermal annealing at 500 {\deg}C on aerosol-deposited $0.65\text{Pb}(\text{Mg}_{1/3}\text{Nb}_{2/3})\text{O}_{3}-0.35\text{PbTiO}_{3}$ thick films on stainless-steel substrates are investigated using two…

The effect of vacuum annealing thin films of the compensated ferrimagnetic half-metal Mn2RuxGa at temperatures from 250 to 400 degree Celsius is investigated. The 39.3 nm films deposited on (100) MgO substrates exhibit perpendicular…

We investigate the effect of annealing temperature on the crystalline structure and physical properties of tantalum-pentoxide films grown by radio frequency magnetron sputtering. For this purpose, several tantalum films were deposited and…

We have systematically investigated the annealing effect on the structure and composition of the polar surface of SrTiO3 (111), starting with an ex-situ chemical etch. The relative surface concentration between Ti and Sr strongly depends on…

Here, we optimized the annealing temperature of HZO/TiN thin film heterostructure via multiscale analysis of remnant polarization, crystallographic phase, minimum ferroelectric domain size, and average grain size. We found that the remnant…

We report annealing induced exchange bias in Fe-Cu-Pt based heterostructures with Cu as an intermediate layer (Fe/Cu/Pt heterostructure) and capping layer (Fe/Pt/Cu heterostructure). Exchange bias observed at room temperature (300 K) is…

Due to its multiferroic properties and narrow optical bandgap, Bismuth ferrite has been widely explored for spintronics, photovoltaics, and photocatalysis applications. Bismuth ferrite can be synthesized in various forms like bulk, thin…

A Li-Al-O thin film materials library, deposited by inert magnetron sputtering and post-deposition annealing in O2 atmosphere, was used to study the effects of different annealing temperatures (300 to 850{\deg}C) and durations (1 min to 7…

The influence of annealing parameters - temperature and time - on the magnetic properties of As-capped (Ga,Mn)As epitaxial thin films have been investigated. The dependence of the transition temperature (Tc) on annealing time marks out two…