相关论文: Recurrence analysis of the Portevin-Le Chatelier e…
Tensile tests were carried out by deforming polycrystalline samples of Al-2.5%Mg alloy at four different temperatures in an intermediate strain rate regime of 2x10-4s-1 to 2x10-3s-1. The Portevin-Le Chatelier (PLC) effect was observed…
The plastic deformation of dilute alloys is often accompanied by plastic instabilities due to dynamic strain aging and dislocation interaction. The repeated breakaway of dislocations from and their recapture by solute atoms leads to stress…
Tensile tests have been carried out by deforming polycrystalline samples of substitutional Al-2.5%Mg alloy at room temperature at a range of strain rates. The Portevin - Le Chatelier (PLC) effect was observed. From an analysis of the…
The scaling behavior of the Portevin-Le Chatelier (PLC) effect was studied by deforming Al-2.5%Mg alloy for a wide range of strain rates. To reveal the exact scaling nature, the time series data of true stress vs. time, obtained during…
The scaling behavior of the Portevin-Le Chatelier (PLC) effect is studied by deforming a substitutional alloy, Al-2.5%Mg and an interstitial alloy, low carbon steel (0.15%C, 0.33%Mn, 0.04%P, 0.05%S, 0.15%Si and rest Iron) at room…
The Portevin-Le Chatelier(PLC) effect has been investigated by deforming Al-2.5%Mg alloy in the strain rate regime where simultaneously two types (type B and type A) of serrations appear in the stress strain curve. Our analysis reveal that…
Tensile tests were carried out by deforming polycrystalline samples of an interstitial alloy, low carbon steel at room temperature in a wide range of strain rates where the Portevin-Le Chatelier (PLC) effect was observed. The observed…
The Portevin-Le Chatelier (PLC) effect is a kind of plastic instability observed in many dilute alloys when deformed at certain ranges of strain rate and temperature. In this letter we establish that the dynamical process responsible for…
Tensile tests were carried out by deforming polycrystalline samples of substitutional Al-2.5%Mg alloy at room temperature for a range of strain rates. The Portevin-Le Chatelier (PLC) effect was observed throughout the strain rate regime.…
A simplified 3D FE model based on McCormick's model is developed to numerically predict the spatiotemporal behaviors of the PLC effect in Ti-12Mo alloy tensile tests at 350 degrees C with strain rates from the order of $10^{-4}$ s$^{-1}$ to…
The complexity of the Portevin-Le Chatelier effect in Al-2.5%Mg polycrystalline samples subjected to uniaxial tensile tests is quantified. Multiscale entropy analysis is carried out on the stress time series data observed during jerky flow…
Experimental time series obtained from single and poly-crystals subjected to a constant strain rate tests report an intriguing dynamical crossover from a low dimensional chaotic state at medium strain rates to an infinite dimensional power…
Recent studies on the Portevin - Le Chatelier effect report an intriguing crossover phenomenon from a low dimensional chaotic to an infinite dimensional scale invariant power law regime in experiments on CuAl single crystals and AlMg…
We investigate the Portevin-Le Chatelier effect (PLC), by compressing Al-Mg alloys in a very large deformation range, and interpret the results from the viewpoint of phase transitions and critical phenomena. The system undergoes two…
In this paper, a recently developed numerical technique [{\em Tuncer E and Guba{\'n}ski S M, IEEE Trans Diel El Insul {\bf 8}(3)(2001) 310-320}] is applied to poly(propylene glycol) complex dielectric data to extract more information about…
We present a continuous time random walk model for the Portevin-Le Chatelier (PLC) effect. From our result it is shown that the dynamics of the PLC band can be explained in terms of the Levy Walk.
The influence of the surface pre-deformation on jerky flow caused by the Portevin-Le Chatelier (PLC) effect was investigated using flat tensile specimens of an Al-Mg alloy. Although jerky flow represents a macroscopic plastic instability,…
Recurrence plot is a quite easy tool to be used in time series analysis,in particular for measuring unstable periodic orbits embedded in a chaotic dynamical system. Recurrence quantified analysis (RQA) is an advance tool that allows the…
Recurrence quantification analysis (RQA) is a widely used tool for studying complex dynamical systems, but its standard implementation requires computationally expensive calculations of recurrence plots (RPs) and line length histograms.…
The recurrence times between extreme events have been the central point of statistical analyses in many different areas of science. Simultaneously, the Poincar\'e recurrence time has been extensively used to characterize nonlinear dynamical…