仪器与探测器
Brownian thermal noise of thin-film coatings is a fundamental limit for high-precision experiments based on optical resonators such as gravitational-wave interferometers. Here we present the results of a research activity aiming to develop…
The optimisation of the sensitive region of CMOS sensors with complex non-uniform electric fields requires precise simulations, and this can be achieved by a combination of electrostatic field simulations and Monte Carlo methods. This paper…
Organic scintillators are important in advancing nuclear detection and particle physics experiments. Achieving a high signal-to-noise ratio necessitates efficient pulse shape discrimination techniques to accurately distinguish between…
In TDC testing or timing system implementation tasks, it is often desirable to generate signal pulses with fine adjustable time intervals. In delay cell-based schemes, the time adjustment steps are limited by the propagation delays of the…
Bent monolithic active pixel sensors are the basis for the planned fully cylindrical ultra low material budget tracking detector ITS3 of the ALICE experiment. This paper presents results from testbeam campaigns using high-energy particles…
The Micro Vertex Detector (MVD) is the most upstream detector of the fixed-target Compressed Baryonic Matter Experiment (CBM) at the future Facility for Antiproton and Ion Research (FAIR). It enables high-precision low-momentum tracking in…
PandaX-4T experiment is a deep-underground dark matter direct search experiment that employs a dual-phase time projection chamber with a sensitive volume containing 3.7 tonne of liquid xenon. The detector of PandaX-4T is capable of…
The CALICE technological RPC-based SDHCAL prototype that fullfils all the requirements of compactness, hermeticity and power budget of the future lepton accelerator experiments, has been extensively tested and has provided excellent results…
This study explores the feasibility of using scintillation detectors for muon calorimetry through experiments conducted at CERN's T10 beamline. Results from organic scintillators with varying thicknesses and readout methods, as well as a…
A new instrument has been designed for measuring frictional hysteresis cycles and normal load-indentation curves. The primary purpose of the BMT is the validation of more predictive modeling approaches for damping in friction joints. An…
BINGO is a project aiming to set the grounds for large-scale bolometric neutrinoless double-beta-decay experiments capable of investigating the effective Majorana neutrino mass at a few meV level. It focuses on developing innovative…
The detector of TRopIcal DEep-sea Neutrino Telescope (TRIDENT) will use large-area silicon photomultiplier (SiPM) arrays combined with photomultiplier tubes to boost photon detection efficiency and pointing capability. An…
Recent advancements in particle physics demand pixel detectors that can withstand increased luminosity in the future collider experiments. In response, MALTA, a novel monolithic active pixel detector, has been developed with a cutting-edge…
The RPCs employed at the LHC experiments are currently operated in avalanche mode, with a mixture containing a large fraction of C$_{2}$H$_{2}$F$_{4}$ ($\approx$90\% or more) with the addition of i-C$_{4}$H$_{10}$ and SF$_{6}$ in different…
Plastic scintillators are widely used for the detection of elementary particles, and 3D reconstruction of particle tracks is achieved by segmenting the detector into 3D granular structures. In this study, we present a novel prototype…
Ground-based gravitational wave detectors use laser interferometry to detect the minuscule distance change between test masses caused by gravitational waves. Stray light that scatters back into the interferometer causes transient signals…
A CubeSat with a prototype scintillating detector with a sensitive volume of GAGG crystal is being developed with a possible launch date of 2025. Its purpose is to characterize the background signals that mimic the neutrino interaction that…
Transport and heat capacity measurements under pressure must reconcile the limited available space and complicated geometry of a high-pressure cell with the need for multiple electrical connections. One solution for diamond anvil cells is…
Space-based gravitational wave detectors, such as the Laser Interferometer Space Antenna (LISA), use picometer-precision laser interferometry to detect gravitational waves at frequencies from 1 Hz down to below 0.1 mHz. Laser…
Electrostatic force microscopy (EFM) can image nanoscale objects buried below the surface. Here, we theoretically show that this capability can be used to obtain nanotomographic information, i.e., the physical dimensions and dielectric…