English
Related papers

Related papers: Status of the ATF extraction line laser-wire

200 papers

The wire scanners are used for a measurement of the very small beam size and the emittance in Accelerator Test Facility (ATF). They are installed in the extraction beam line of ATF damping ring. The extracted beam emittance are ex=1.3x10-9…

Accelerator Physics · Physics 2007-05-23 H. Hayano

A laserwire transverse electron beam size measurement system has been developed and operated at the Accelerator Test Facility 2 (ATF2) at KEK. Special electron beam optics were developed to create an approximately 1 x 100 {\mu}m (vertical x…

ATF2 is a final-focus test beam line which aims to focus the low emittance beam from the ATF damping ring to a vertical size of about 37 nm and to demonstrate nanometer level beam stability. Several advanced beam diagnostics and feedback…

A conceptual design work and a basic experimental study of a new beam profile monitor have been performed. The monitor will be used to measure emittance of an electron beam in the ATF damping ring at KEK, in which the transverse beam size…

High Energy Physics - Experiment · Physics 2009-09-25 Yutaka Sakamura , Yasuo Hemmi , Hiroaki Matsuo , Hiroshi Sakai , Noboru Sasao , Yasuo Higashi , Timo Korhonen , Takashi Taniguchi , Junji Urakawa

A tightly focused laser beam (laser wire) is used for measurement of transverse electron beam sizes in storage rings and linear colliders. It is assumed that the laser beam does nothing with the electron beam except Compton scatterings…

High Energy Physics - Experiment · Physics 2015-06-25 V. I. Telnov

Characterization and control of the transverse phase space of high-brightness electron beams is required at free-electron lasers or electron diffraction experiments for emittance measurement and beam optimization as well as at advanced…

KEK-ATF is doing R&D establishing high-current and low-emittance electron beam for the future linear colliders. In ATF, 15 ps length electron beam is generated by combination of a thermionic gun, a couple of 357 MHz SHBs, and a S-band TW…

Accelerator Physics · Physics 2007-05-23 Masao Kuriki , Hitoshi Hayano , Katsushi Hasegawa

A beam position monitor (BPM) upgrade at the KEK Accelerator Test Facility (ATF) damping ring has been accomplished, carried out by a KEK/FNAL/SLAC collaboration under the umbrella of the global ILC R&D effort. The upgrade consists of a…

We construct a new detector to monitor $\gamma$ yields in bunch by bunch basis for the Laser Compton experiment at the KEK ATF which is capable to separate $\gamma$ rays in 5.6ns-spacing multi-bunch operation of the KEK ATF. In this article…

Instrumentation and Detectors · Physics 2017-08-23 Tohru Takahashi

We searched high resolution spectra of 5600 nearby stars for emission lines that are both inconsistent with a natural origin and unresolved spatially, as would be expected from extraterrestrial optical lasers. The spectra were obtained with…

Instrumentation and Methods for Astrophysics · Physics 2017-05-24 Nathaniel K. Tellis , Geoffrey W. Marcy

In 2023, we are replacing the LLRF system for the KEK-PF 2.5 GeV ring. The new system is composed of digital boards such as eRTM, AMC, and {\mu}RTM, based on the MTCA.4 standard. In our system, we adopted the non-IQ direct sampling method…

Accelerator Physics · Physics 2023-10-24 D. Naito , N. Yamamoto , T. Takahashi , A. Motomura , S. Sakanaka

We developed an electron beam size monitor for extremely small beam sizes. It uses a laser interference fringe for a scattering target with the electron beam. Our target performance is < 2 nm systematic error for 37 nm beam size and < 10%…

The linewidth enhancement factor (LEF) has recently moved into the spotlight of research on frequency comb generation in semiconductor lasers. Here we present a novel modulation experiment, which enables the direct measurement of the…

This archive summarizes a working paper and conference proceedings related to laser wire scanner development for the Future Linear Collider (FLC) in the years 2001 to 2006. In particular the design, setup and data taking for the laser wire…

Shintake monitor is a nanometer-scale electron beam size monitor. It probes a electron beam by an interference fringe pattern formed by split laser beams. Minimum measurable beam size by this method is less than 1/10 of laser wavelength. In…

Accelerator Physics · Physics 2009-02-16 T. Suehara , H. Yoda , M. Oroku , T. Yamanaka , S. Komamiya , T. Sanuki , T. Tauchi , Y. Honda , T. Kume

Atomic Force Microscopy - Infrared (AFM-IR) has emerged as a useful technique for measuring absorption spectra with spatial resolution better than the optical diffraction limit. The technique relies on the movement of a probe for atomic…

Applied Physics · Physics 2024-01-17 Luca Quaroni

Recent works of [1402.2301,1402.4119], claiming the detection of extra emission line with energy ~3.5 keV in X-ray spectra of certain clusters of galaxies and nearby Andromeda galaxy, have raised considerable interest in astrophysics and…

High Energy Astrophysical Phenomena · Physics 2015-08-26 Dmytro Iakubovskyi

A scanning tunnelling microscope is used to pull a polythiophene wire from a Au(111) surface while measuring the current traversing the junction. Abrupt current increases measured during the lifting procedure are associated to the…

A novel and simple model is proposed for the measurement of the linewidth enhancement factor (LEF) {\alpha} of multiwavelengths semiconductor laser. It is based on the suppression characteristics of an arbitrary mode while other modes are…

Optics · Physics 2011-06-21 Samir K Mondal

Narrow Fe K$\alpha$ fluorescent emission lines arising at $\sim$kpc-scale separations from the nucleus have only been detected in a few AGN. The detections require that the extended line emission be spatially resolved and sufficiently…

High Energy Astrophysical Phenomena · Physics 2023-12-04 P. Tzanavaris , T. Yaqoob , S. LaMassa
‹ Prev 1 2 3 10 Next ›