Related papers: Fast high--voltage amplifiers for driving electro-…
Using recently available GaN FETs, a 600 Volt three-stage, multi-FET switch has been developed having 2 nanosecond rise time driving a 200 Ohm load with the potential of approaching 30 MHz average switching rates. Possible applications…
An e+e- linear collider at 500-GeV C.M. (center of mass) has been proposed as a future accelerator. The C-band linear collider has more than a thousand klystrons and matching modulators. The linear colliders require smart modulators with…
Advances in power electronics have made it possible to achieve high power levels, e.g., reaching GW in grids, or alternatively high output bandwidths, e.g., beyond MHz in communication. Achieving both simultaneously, however, remains…
We study theoretically the responsivity of optical modulators. For the case of linear response we find using perturbation theory an upper bound imposed upon the responsivity. For the case of two mode modulator we find a lower bound imposed…
An opto--electro--mechanical system formed by a nanomembrane capacitively coupled to an LC resonator and to an optical interferometer has been recently employed for the high--sensitive optical readout of radio frequency (RF) signals [T.…
This paper reviews the main types of radio-frequency power amplifiers which are, or may be, used for high-power hadron accelerators. It covers tetrodes, inductive output tubes, klystrons and magnetrons with power outputs greater than 10 kW…
We report the generation of multimode solitons in step-index fiber. The solitons are superpositions of 5-10 temporally-aligned transverse modes, they exhibit speckled beam profiles, and the spatio-spectral variation across the soliton can…
This article presents the development of a cost-effective and efficient electronic module for silicon photomultipliers (SiPM). The electronic module combines essential functionalities, such as a high voltage power supply, a preamplifier,…
Achieving the highest possible mass resolving power in a multi-reflection time-of-flight mass spectrometer requires very high-stability power supplies. To this end, we have developed a programmable high-voltage power supply that can achieve…
The development of the sixth generation of wireless communications technology (6G) requires terminals that can operate at frequencies above 100 GHz. For human-centric applications, these terminals should also be flexible and have low power.…
A family of interleaved current-fed high step-up dc-dc converters are introduced and analyzed here by combining a voltage multiplier (VM) and an active clamp circuit for high-voltage high-power applications. Low input currents and output…
We report on the demonstration of a femtosecond all-optical modulator providing, without nonlinearity and therefore at arbitrarily low intensity, ultrafast light-by-light control. The device engages the coherent interaction of optical waves…
Generating an exponential decay function with a time constant on the order of hundreds of milliseconds is a mainstay for neuromorphic circuits. Usually, either subthreshold circuits or RC-decays based on transconductance amplifiers are…
- This paper describes a pipeline analog-to-digital converter is implemented for high speed camera. In the pipeline ADC design, prime factor is designing operational amplifier with high gain so ADC have been high speed. The other advantage…
Future high-energy physics experiments using SiPMs as photosensitive elements may require operation at low temperatures (down to 80 K) to measure single photons with high time resolution in a highly radioactive environment. This calls for a…
We present a mode-locked semiconductor laser oscillator that emits few picosecond pulses (5-8ps at 379MHz repetition) with record peak power (112W) and pulse energy (0.5nJ) directly out of the oscillator (with no amplifier). To achieve this…
In this work, dynamic load modulation of high power amplifiers using a varactor-based tunable matching network is presented. The feasibility of dynamic tuning and efficiency enhancement of this technique is demonstrated using a modular…
Broadband electro-optic intensity modulators are essential to convert electrical signals to the optical domain. The growing interest in THz wireless applications demands modulators with frequency responses to the sub-THz range, high power…
A solution to the stability of capacitor-less low-dropout regulators with a 4pF Miller capacitor in Multi-level current amplifier is proposed. With the Miller compensation, a more than 50{\deg}phase margin is guaranteed in full load. An…
Detectors based on pixels with timing capabilities are gaining increasing importance in the last years. Next-to-come high-energy physics experiments at colliders requires the use of time information in tracking, due to the increasing levels…