Related papers: Inductive-Adder Kicker Modulator for Darht-2
An all solid-state kicker pulser for a high current induction accelerator (the Dual-Axis Radiographic Hydrodynamic Test facility DARHT-2) has been designed and fabricated. This kicker pulser uses multiple solid state modulators stacked in…
The second phase accelerator for the Dual Axis Hydrodynamic Test facility (DARHT) is designed to provide an electron beam pulse that is 2 microsec long, 2kA, and 20 MeV in particle energy. The injector provides 3.2 MeV so that the linac…
Modulation-doped AlGaAs/GaAs heterostructures are utilized extensively in the study of quantum transport in nanostructures, but charge fluctuations associated with remote ionized dopants often produce deleterious effects. Electric…
This paper describes the mechanical design of the downstream beam transport line for the second axis of the Dual Axis Radiographic Hydrodynamic Test (DARHT II) Facility. The DARHT-II project is a collaboration between LANL, LBNL and LLNL.…
A 3.2 MeV injector has been designed and built for the Darht II Project at Los Alamos Lab. The installation of the complete injector system is nearing completion at this time. The requirements for the injector are to produce a 3.2 MeV, 2000…
We have modified the single pulse target experimental facility[ ] on the Experimental Test Accelerator II (ETA-II) to perform the double pulse target experiments to validate the DARHT-II[, ] multi-pulse target concept. The 1.15 MeV, 2 kA…
In this work, dynamic load modulation of high power amplifiers using a varactor-based tunable matching network is presented. The feasibility of dynamic tuning and efficiency enhancement of this technique is demonstrated using a modular…
A Mott insulator sometimes induces unconventional superconductivity in its neighbors when doped and/or pressurized. Because the phase diagram should be strongly related to the microscopic mechanism of the superconductivity, it is important…
We utilize a time-periodic ratchet-like potential modulation imposed onto a two-dimensional electron system inside a GaAs/Al$_x$Ga$_{1-x}$As heterostructure to evoke a net dc pumping current. The modulation is induced by two sets of…
We describe a kinetic inductance traveling-wave (KIT) amplifier suitable for superconducting quantum information measurements and characterize its wideband scattering and noise properties. We use mechanical microwave switches to calibrate…
Electron beams of linear induction accelerators experience deflective forces caused by RF fields building up as a result of accelerating cavities of finite size. These forces can significantly effect the beam when a long linac composed of…
A 3.2 MeV injector has been designed and built for the Darht II Project at Los Alamos Lab. The installation of the complete injector system is nearing completion at this time. The requirements for the injector are to produce a 3.2 MeV, 2000…
Modulation-doped heterostructures are a key enabler for realizing high mobility and better scaling properties for high performance transistors. We report the realization of modulation-doped two-dimensional electron gas (2DEG) at…
The PIP-II project is a program to upgrade the Fermilab accelerator complex. The PIP-II linac includes a 2.1 MeV Medium Energy Beam Transport (MEBT) section that incorporates a unique chopping system to perform arbitrary, bunch-by-bunch…
Electro-optic signal modulation provides a key functionality in modern technology and information networks. Photonic integration has enabled not only miniaturizing photonic components, but also provided performance improvements due to…
THz amplitude modulators and switches are considered to be the main building blocks of future THz communication systems. Despite rapid progress, modulation and switching devices in this electromagnetic spectrum lag far behind other…
This presentation will be a broad survey of progress in induction technology over the past four years. Much work has been done on accelerators for hydrodynamic test radiography and other applications. Solid-state pulsers have been developed…
We present a design of a stripline kicker for Integrable Optics Test Accelerator (IOTA). For its experimental program IOTA needs two full-aperture kickers, capable to create an arbitrary controllable kick in 2D. For that reason their…
The dual-axis radiography for hydrodynamic testing (DARHT) facility at Los Alamos National Laboratory uses two electron linear-induction accelerators (LIA) to produce the source spots for perpendicular flash radiographs of a dynamic…
The 74-cell DARHT-II long-pulse linear induction accelerator (LIA) was commissioned in its final configuration in 2007-2008. The final accelerated beam parameters were 2 kA, and greater than 17 MeV in a pulse flat to better than +/- 1% for…