Related papers: Experience with the Pep-II RF System at High Beam …

The UNILAC was improved for high current performance by replacing the Wideroe prestripper accelerator by an RFQ and an IH-type DTL. In addition, one of two ion source terminals was equipped with high current sources of MUCIS- and…

The well known Lambda-system using two ground state hyperfine levels, F=1 and F=2 of 5S1/2 and one hyperfine level, F=2 of excited state of 5P3/2 of 87Rb has been recently studied using two counter- propagating control lasers [1]. The…

Conventional relays face challenges for transmission lines connected to inverter-based resources (IBRs). In this article, a single-ended intelligent protection of the transmission line in the zone between the grid and the PV farm is…

The China spallation neutron source (CSNS) linac is designed with beam energy of 81MeV and a peak current of 15mA in the first phase. The RF power system for the 81 MeV Linac requires 8 units of RF power sources, each unit has one…

In many practical control applications, the performance level of a closed-loop system degrades over time due to the change of plant characteristics. Thus, there is a strong need for redesigning a controller without going through the system…

This paper presents the uTCA4.0-based BPM electronics for PIP-II, featuring four 250 MSPS ADCs and a Xilinx UltraScale+ MPSoC FPGA with 10 GbE uplink. Design elements include signal conditioning, clock, and thermal management. The FPGA…

Relaxed conditions are given for stability of a feedback system consisting of an exponentially stable multi-input multi-output nonlinear plant and an integral controller. Roughly speaking, it is shown that if the composition of the plant…

Beamforming is central to the processing function of all phased arrays and becomes particularly challenging with a large number of antenna element (e.g. >100,000). The ability to beamform efficiently with reasonable power requirements is…

The PIP-II superconducting RF linac is currently under construction at Fermilab and is expected to be completed by the end of 2028. PIP-II is capable of operating in a continuous-wave mode and can concurrently supply 800 MeV protons to a…

High gradient accelerator injectors have been widely studied throughout the world-leading accelerator facilities. The demand for high frequency cavities have led the Detector, Accelerator and instrumentation laboratory (KAHVELab) in…

In this paper, we investigate a radio frequency (RF) lens-embedded massive multiple-input multiple-output (MIMO) system and evaluate the system performance of limited feedback by utilizing a technique for generating a suitable codebook for…

In this work, we present a novel robust distributed beamforming (RDB) approach based on low-rank and cross-correlation techniques. The proposed RDB approach mitigates the effects of channel errors in wireless networks equipped with relays…

The Proton Improvement Plan phase II (PIP-II) project currently under construction at FNAL will replace the existing 400 MeV normal conducting linac with a new 800 MeV superconducting linac. The beam power in the downstream rapid-cycling…

The framework of linear parameter-varying (LPV) systems has shown to be a powerful tool for the design of controllers for complex nonlinear systems using linear tools. In this work, we derive novel methods that allow to synthesize LPV…

We present the design and implementation of a measurement system that enables parallel drive and detection of small currents and voltages at numerous electrical contacts to a multi-terminal electrical device. This system, which we term a…

A radially-coupled coaxial fast Faraday cup design was presented in [1] for high-intensity non-relativistic proton beams. In this work, we discuss a modification of that design in the context of a relatively lower intensity ion beam for…

The LHCb experiment at CERN has undergone a comprehensive upgrade, including a complete re-design of the trigger system into a hybrid-architecture, software-only system that delivers ten times more interesting signals per unit time than its…

The use of non-invasive sensors & systems to measure particle beam characteristics is a crucial part of modern accelerator control systems due to their ability to return real time passive measurements without impacting the beam quality.…

We consider tracking control for uncertain linear systems with known relative degree which are possibly non-minimum phase, i.e., their zero dynamics may have an unstable part. For a given sufficiently smooth reference signal we design a…

The BaBar experiment is the particle detector at the PEP-II B-factory facility at the Stanford Linear Accelerator Center. During the summer shutdown 2002 the BaBar Event Building and Level-3 trigger farm were upgraded from 60 Sun Ultra-5…