Related papers: Experience with the Pep-II RF System at High Beam …

The control system of the 1.5 MeV FEL injector is built on the base of ported EPICS. It uses low-cost hardware: personal computers with the processor Intel x86 and CAMAC equipment produced by our institute. At present time, the distributed…

A high peak current, flat longitudinal phase space electron beam is desirable for efficient x-ray free electron laser (FEL) radiation in next generation light sources. To attain such a beam requires the extensive design of the linear…

The phase averaging reference line system provides the RF phase reference, LO and clock signals to the LLRF and other accelerator sub-systems. The PIP-II linac has RF systems at three frequencies - 162.5 MHz, 325 MHz and 650 MHz. A…

The functions of the Low-Level Radio Frequency (LLRF) system at European Spallation Source (ESS) are implemented on different Field-Programmable Gate Array (FPGA) boards in a Micro Telecommunications Computing Architecture (MTCA) crate.…

Output feedback control design for linear time-invariant systems in the presence of sporadic measurements and exogenous perturbations is addressed. To cope with the sporadic availability of measurements of the output, a hybrid dynamic…

Industrial particle accelerators inherently operate in much dirtier environments than typical research accelerators. This leads to an increase in noise both in the RF system and in other electronic systems. Combined with the fact that…

Leveraging the full scientific capabilities of next-generation high-repetition-rate free-electron lasers requires programmable control over electron-beam properties at their source. The photoinjector drive laser defines the electron beam's…

This paper investigates the problem of regulating in real time a linear dynamical system to the solution trajectory of a time-varying constrained convex optimization problem. The proposed feedback controller is based on an adaptation of the…

Details on Final design for Cryogenic Electrical & Controls System for Fermilab' s next-gen particle accelerator PIP-II. Electrical Controls System includes instrumentation and controls of Cryogenics Distribution System and Cryomodules.…

Selection of operating wavelength of the Yb-doped fiber-ring lasers using longperiod fiber gratings (LPFGs) is suggested. In the proposed method, customized LPFG that sustains high powers serves as a broad-band rejection filter. It modifies…

The commissioning of two cryomodule components is underway at Fermilab's Superconducting Radio Frequency (SRF) Accelerator Test Facility. The research at this facility supports the next generation high intensity linear accelerators such as…

Tuning system plays a very important role when superconducting cavity works. It cooperates with other control loops, to adjust the frequency of cavity with high precision, reduce the reflection power, guarantee the stability of beam and…

PIP-II is an essential upgrade of the Fermilab complex that will enable the worlds most intense high-energy beam of neutrinos for the international Deep Underground Neutrino Experiment at LBNF and support a broad physics program at…

Radiofrequency (RF) systems play a critical role in particle accelerators by enabling the acceleration, manipulation, and diagnosis of charged particle beams. At the heart of many of these systems lies the RF cavity, whose effective design…

A liquid-core (LiCo) dye laser was demonstrated using Rhodamine B (RhB) dissolved in glycerol as the gain medium and fluorinated ethylene propylene (FEP) tubing as the waveguide. Photoluminescence and amplified spontaneous emission (ASE)…

In order to ensure the beam quality and meet the requirements introduced by the BEPCII storage ring, the beam energy feedback system has been developed at the exit of the linac. This paper describes the implementation and commissioning of…

This paper introduces the Progressive Barrier Lyapunov Function (p-BLF) for output- and full-state-constrained nonlinear control systems. Unlike traditional BLF methods, where control effort continuously increases as the state approaches…

This paper investigates the system outage performance of a useful architecture of two-way hybrid visible light communication/radio frequency (VLC/RF) communication using overlay mode of cooperative cognitive radio network (CCRN). The demand…

The Proton Improvement Plan II (PIP-II) project is an essential upgrade to Fermilab's particle accelerator complex to enable the world's most intense neutrino beam for LBNF/DUNE and a broad particle physics program for many decades to come.…

Hybrid analog and digital BeamForming (HBF) is one of the enabling transceiver technologies for millimeter Wave (mmWave) Multiple Input Multiple Output (MIMO) systems. This technology offers highly directional communication, which is able…