Related papers: A slow control system for the Garfield apparatus
A new concept of a free-space, high-speed (Gbps) optical communication system based on spectral encoding of radiation from a broadband pulsed laser is developed. It is shown that, in combination with the use of partially coherent laser…
A distributed controller for secondary control problems in microgrids with grid-forming (GFM) inverter-based resources (IBRs) is developed. The controller is based on distributed optimization and is synthesized and implemented…
Acoustic devices play an important role in classical information processing. The slower speed and lower losses of mechanical waves enable compact and efficient elements for delaying, filtering, and storing of electric signals at radio and…
Physical Research Laboratory's (PRL) Optical Polarimeter has been used on various telescopes in India since its development in-house in the mid 1980s. To make the instrument more efficient and effective we have designed the acquisition and…
We have implemented a control system for experiments in atomic, molecular and optical physics based on a commercial low-cost board, featuring a field-programmable gate array as part of a system-on-a-chip on which a Linux operating system is…
The Laser Interferometer Gravitational-wave Observatory (LIGO) consists of two identical yet independent, widely-separated, long-baseline gravitational-wave detectors. Each Advanced LIGO detector consists of complex optical-mechanical…
The original LIGO suspension control system [1] used analog circuitry to implement the closed loop damping required for local control of each the suspended optics. Recent developments in analog to digital converters (ADC), digital to analog…
Gradient index devices for the simultaneous control of the S 0 and A 0 Lamb modes are presented and numerically analysed. It is found a special relationship between the refractive indexes for these two modes which allows their simultaneous…
Each accelerator control system has a variety of measurement devices. One of the most common types of instrument interfaces used for their control is a serial (RS-232) bus. It is inexpensive and adequate for relatively simple measurement…
Most of the devices in the SLAC control system are accessed via interface modules in ~450 CAMAC crates. Low-cost controllers in these crates communicate via a SLAC-proprietary bit-serial protocol with 77 satellite control computers…
Building an accelerator at six geographically dispersed sites is quite mad, but politically expedient. The Spallation Neutron Source (SNS), currently under construction in Oak Ridge, Tennessee, combines a pulsed 1 Gev H- superconducting…
The Accelerator Control System at Fermilab has evolved to enable this relatively large control system to be encapsulated into a "box" such as a laptop. The goal was to provide a platform isolated from the "online" control system. This…
This paper presents an extensive framework focused on the control design, along with stability and performance analysis, of Grid-Following Inverters (GFL). It aims to ensure their effective operation under both stiff and weak grid…
The AI for Experimental Controls project is developing an AI system to control and calibrate detector systems located at Jefferson Laboratory. Currently, calibrations are performed offline and require significant time and attention from…
The Integrated Computer Control System (ICCS) for the National Ignition Facility (NIF) is a layered architecture of 300 front-end processors (FEP) coordinated by supervisor subsystems including automatic beam alignment and wavefront…
Efficient operation of a submillimeter interferometer requires remote (preferably automated) control of mechanically tuned local oscillators, phase-lock loops, mixers, optics, calibration vanes and cryostats. The present control system for…
The control system of the 1.5 MeV FEL injector is built on the base of ported EPICS. It uses low-cost hardware: personal computers with the processor Intel x86 and CAMAC equipment produced by our institute. At present time, the distributed…
We present Doberman (Detector OBsERving and Monitoring ApplicatioN), a lightweight, modular, and open-source slow control system designed for small-to medium-scale physics experiments. Doberman addresses the gap between heavyweight…
A 20 GHz LLRF system is being built using a two-board(RF Front End + ADC/DAC/FPGA) architecture. The RF Front End provides 8 down-converting channels and 3 up-converting channels (5.5-20 GHz RF to 0.05-3 GHz IF). Separate, phase locked,…
Speech enhancement in hearing aids is a challenging task since the hardware limits the number of possible operations and the latency needs to be in the range of only a few milliseconds. We propose a deep-learning model compatible with these…