Related papers: U-70 Proton Synchrotron Extracted Beam Lines Contr…
We will use EPICS toolkit [1] to build a prototype for upgrading BEPC control system. The purposes are for the following three aspects: (1) Setup a network based distributed control system with EPICS. (2) Study some front-end control…
The Superconducting Radio Frequency (SRF) system of the upgrade project of Beijing Electron Positron Collider (BEPCII) has been in operation for almost 8 years. The SRF system has accelerated both electron and positron at the design beam…
The paper describes an electronic multiprocessor system that assures functionality of a miniature UAV capable of 3D flying. The apparatus consists of six independently controlled brushless DC motors, each having a propeller attached to it.…
The new method to stabilize the beam energy of the KEK 40MeV proton linac, is developed now. In this method, the signal of the velocity monitor installed upstream the debuncher in the 40MeV beam line, is processed and then fed to the phase…
To maximize the physics potential of future neutrino oscillation experiments, it is proposed to build a 15-MW `proton driver' consisitng solely of a 3-GeV proton injector linac (PI) and a 17-GeV superconducting ILC-type linac (SCL). The…
An electron beam polarization of 80% or greater will be a key feature of a 1 TeV Linear Collider. Accurate measurements of the beam polarization will therefore be needed. We discuss design considerations and capabilities for a…
A proton irradiation site for silicon detectors has been developed and commissioned at the Bonn Isochronous Cyclotron. The accelerator provides 14 MeV proton beams of up to 1 $\mu$A at beam widths of a few mm to the setup. Devices Under…
We describe a study of high-energy Compton beam polarimeters for the future e+e- linear collider machine TESLA. A segment of the beam delivery system has been identified, which is aligned with the e+e- collision axis and which has a…
In NSC KIPT linac, a neutron source based on a subcritical assembly driven by a 100MeV/100kW electron linear accelerator is under design and development. The linear accelerator needs a new high current electron gun. In this paper, the…
Current developments of high-speed magnetic levitation technology using the principle of the electromagnet suspension (EMS) focus on reaching vehicle speeds of more than 600 km/h. With increasing vehicle speeds, however, updated control…
With the growing number of severe system disturbances and blackouts around the world, controlled system separation is becoming an increasingly important system integrity protection scheme (SIPS) to save the electric power system from a…
A beam line for electrons with energies in the range of 1 to 45 GeV, low contamination of hadrons and muons and high intensity up to 10^6 per accelerator spill at 27 GeV was setup at U70 accelerator in Protvino, Russia. A beam tagging…
At the High Energy Photon Source (HEPS) where up to 90 beamlines can be provided in the future, minimisation of workload for individual beamlines and maximisation of knowledge about one beamline that can be applied to other beamlines is…
Collimation systems in particle accelerators are designed to safely and efficiently dispose of unavoidable beam losses during operation. Their specific roles vary depending on the type of accelerator. The state of the art in hadron beam…
Japan Proton Accelerator Research Complex (J-PARC) aims at a MW-class proton accelerator facility. One of the promising solutions for increasing the beam power of the Main Ring (MR) is converters of the main magnets with new ones for this…
SPPC (Super Proton-Proton Collider) is a discovery machine that is designed for energy frontier research in two decades from now, as the second stage of the CEPC-SPPC project. The main objective is to carry out experiments at 125 TeV in…
A possibility to accelerate a high intensity polarized proton beam up to 70 GeV at the IHEP accelerator, extract it from the main ring and deliver to several experimental setups is being studied now. We propose to study a wealth of single-…
This study focuses on implementing a real-time control system for a particle accelerator facility that performs high energy physics experiments. A critical operating parameter in this facility is beam loss, which is the fraction of…
The China spallation neutron source (CSNS) linac is designed with beam energy of 81MeV and a peak current of 15mA in the first phase. The RF power system for the 81 MeV Linac requires 8 units of RF power sources, each unit has one…
The Stanford Linear Collider (SLC) was the first prototype of a new type of accelerator, the electron-positron linear collider. Many years of dedicated effort were required to understand the physics of this new technology and to develop the…