Related papers: Effective Dynamic Range in Measurements with Flash…
Single photon detector (SPD) has a maximum count rate due to its dead time, which results in that the dynamic range of photon counting optical time-domain reflectometry (PC-OTDR) de-creases with the length of monitored fiber. To further…
Time-tagging units and coincidence detectors are used in many scientific research fields. The required timing resolution and number of input channels are varying, but some emerging experiments in the field of quantum optics require up to 32…
Scanning transmission electron microscopy (STEM) has a broad range of applications in materials characterization, including real-space imaging, spectroscopy, and diffraction, at length scales from the micron to sub-{\AA}ngstr\"om. The…
A challenge for sensors used in ultraviolet-C (UV-C) decontamination protocols of N95 respirators is validation that the entire N95 surface receives the minimum acceptable dose. Photochromic indicators (PCIs) can accurately measure UV-C…
In this article we present a new diagnostic approach utilizing flow-cytometry to study compounds of nanoparticle samples in solution by analysis of their scattering patterns retrieved from the cytometric measurements. As a specific…
Precise measurements of the frequency and phase of an electrical or optical signal play a key role in various branches of science and engineering. Tracking changing laser frequencies is especially demanding when the lasers themselves are…
Mass characterisation of emerging memory devices is an essential step in modelling their behaviour for integration within a standard design flow for existing integrated circuit designers. This work develops a novel characterisation platform…
A fast-reading current integrator is developed for high time-resolution and low-noise ion beam diagnostics under both continuous-wave and pulsed operating conditions. The system combines a low-leakage transimpedance front-end with a hybrid…
We present the design and performance of a prototype ASIC digitizer for integrated wire chamber readout, implemented in 65 nm commercial CMOS technology. Each channel of the 4-channel prototype is composed of two 16-bit Time-to-Digital…
We present the second prototype of a time-to-digital (TDC) ASIC for the upgrade of the ATLAS Monitored Drift Tube (MDT) detector for High-Luminosity LHC operations. Compared to the first prototype, triple modular redundancy has been…
High precision and large dynamic range measurement are required in the readout systems for the Water Cherenkov Detector Array (WCDA) in Large High Altitude Air Shower Observatory (LHAASO). This paper presents a prototype of 12-bit 40 MSPS…
We demonstrate a 10-GHz bandwidth digitizer with 7-effective bits of resolution and 52dB SFDR, using photonic time stretch technique. To the best of our knowledge, this is the highest resolution analog-to-digital converter (ADC) of the same…
The design and measurement results of ultra-low power, fast 10-bit Successive Approximation Register (SAR) Analog-to-Digital Converter (ADC) prototypes in 65 nm CMOS technology are presented. Eight prototype ADCs were designed using two…
Detecting light is fundamental to all optical experiments and applications. At the single photon level, the quantised nature of light requires specialised detectors, which typically saturate for more than one photon, rendering the…
The recent development of Water-based Liquid Scintillator (WbLS), and the concurrent development of high-efficiency and high-precision-timing light sensors, has opened up the possibility for a new kind of large-scale detector capable of a…
Mueller matrix (MM) polarimetry is an effective, non-invasive tool for retrieving information from complex media. However, the finite dynamic range of optical detectors poses a significant challenge when measurements involve strong…
Time-digital Converter (TDC) aims to measure the arrival time of the leading edge of the pulse signal. Our recent work presented a high resolution multi-phase TDC based on the Kintex-7 Field Programmable Gate Array (FPGA) device. A simple…
Timing systems based on Analog-to-Digital Converters are widely used in the design of previous high energy physics detectors. In this paper, we propose a new method based on deep learning to extract the time information from a finite set of…
The 499 pixel photomultiplier cameras of the VERITAS gamma ray telescopes are instrumented with 500MHz sampling Flash ADCs. This paper describes a preliminary investigation of the best methods by which to exploit this information so as to…
Prevalent Fault Localization (FL) techniques rely on tests to localize buggy program elements. Tests could be treated as fuel to further boost FL by providing more debugging information. Therefore, it is highly valuable to measure the Fault…