Related papers: MgB2 tunnel junctions with native or thermal oxide…
Superconducting nanowires can be synthesised in high-throughput chemical routes and hold great promise as a low-dissipative material for superconducting devices. The applicability of superconducting nanowires, however, has been limited due…
Precisely engineered tunnel junctions exhibit a long sought effect that occurs when the energy of the electron is comparable to the potential energy of the tunneling barrier. The resistance of metal-insulator-metal tunnel junctions…
A relatively high critical temperature, Tc, approaching 40 K, places the recently-discovered superconductor magnesium diboride (MgB2) intermediate between the families of low- and copper-oxide-based high-temperature superconductors (HTS).…
Since the discovery of MgB2 with Tc=39K, various metal diborides of MB2 have been intensively studied to find possible conventional high-temperature superconductors. A possible 2D structure of the metal diboride has been shown to be in the…
As-grown superconducting thin films of MgB2 were prepared by molecular beam epitaxy (MBE), and studied by X-ray and ultraviolet photoelectron spectroscopy (XPS and UPS). Only films prepared at temperatures between 150 and 320 deg. showed…
Recently, magnetic tunnel junctions with perpendicular magnetized electrodes combined with exchange bias films have attracted large interest. In this paper we examine the tunnel magnetoresistance of…
MgB2 superconducting wires with critical temperature Tc approaching 40 K were used for preparation of MgB2/Ag and MgB2/In junctions. The differential conductance vs. voltage characteristics of N-S junctions exhibit clear contribution of…
Recently it was discovered that, under elevated pressures, MoB$_2$ exhibits superconductivity at a critical temperature, $T_c$, as high as 32 K. The superconductivity appears to develop following a pressure-induced structural transition…
Magnetic tunnel junctions (MTJ) with AlOx barrier were fabricated by a deposition tool called Biased Target Ion Beam Deposition (BTIBD) using low energy ion source (0-50 eV) and voltage biased targets. The BTIBD system applies bias voltage…
The thermal stability of MgB2 has been studied experimentally to determine the role of thermodynamic and kinetic barriers in the decomposition process. The MgB2 decomposition rate approaches one monolayer per second at 650 C and has an…
Transport current values of 7.5 x 104 A/cm2 at 4.2 K and self-field are reported for MbB2-based tapes. MgB2 strands were formed by directly filling commercially available MgB2 powder into Nb-lined, monel tubes and wire drawing. The wires…
We experimentally investigate the structural, magnetic and electrical transport properties of La$_{0.67}$Sr$_{0.33}$MnO$_{3}$ based magnetic tunnel junctions with a SrSnO$_3$ barrier. Our results show that despite the large number of…
Materials of the Y-Ba-Cu-O (melt-textured YBa2Cu3O7-d-based materials or MT-YBCO) and Mg-B-O (MgB2-based materials) systems with high superconducting performance, which can be attained due to the formation of regularly distributed…
Atomic intercalation offers a powerful route for engineering two-dimensional (2D) materials by precisely tuning interlayer electronic coupling and spin configurations. Here, we propose a generic strategy for the construction of fully 2D…
The MgB2 bulks were prepared by high energy milling of Mg and B powder. The correlations among milling times, microstructure and superconducting properties were investigated in MgB2 bulks. Samples were characterized by x-ray diffraction…
Atomic layer deposition (ALD) provides a promising approach for deposition of ultrathin low-defect-density tunnel barriers, and it has been implemented in a high-vacuum magnetron sputtering system for in situ deposition of ALD-Al2O3 tunnel…
Magnetic tunnel junctions with the layer sequence Co$_2$Cr$_{0.6}$Fe$_{0.4}$Al/MgO/CoFe were fabricated by magnetron sputtering at room temperature (RT). The samples exhibit a large inverse tunneling magnetoresistance (TMR) effect of up to…
Single crystals of Mg1-xAlxB2 have been grown at a pressure of 30 kbar using the cubic anvil technique. Precipitation free crystals with x < 0.1 were obtained as a result of optimization of already developed MgB2 crystal growth procedure.…
Electrolysis has been performed on a fused mixture of magnesium chloride, potassium chloride, and magnesium borate at 600 oC under an Ar atmosphere using a graphite anode and a Pt cathode. Magnetic measurements and X-ray diffractometry have…
Epitaxial NbO2 (110) films, 20 nm thick, were grown by pulsed laser deposition on Al2O3 (0001) substrates. The Ar/O2 total pressure during growth was varied to demonstrate the gradual transformation between NbO2 and Nb2O5 phases, which was…