Related papers: A Practical Guide for X-Ray Diffraction Characteri…
Coherent x-ray diffractive imaging is extended to high resolution strain analysis in crystalline nanostructured devices. The application potential is demonstrated by determining the strain distribution in (Ga,Mn)As/GaAs nanowires. By…
The X-ray diffractometer in the laboratory is a crucial instrument for analyzing materials in science. It can be used on almost any crystal material, and if the machine parameters are appropriately controlled, it can offer a lot of…
A theoretical study of Al(1-x)Ga(x)N, based on full-potential linearized augmented plane wave method, is used to investigate the variations in the bandgap, optical properties and non-linear behavior of the compound with the variation of Ga…
Soft-X-ray emission and absorption spectroscopies with their elemental specificity are used to determine the local electronic structure of N atoms in Ga(In)AsN diluted semiconductor alloys (N concentrations about 3%) in view of applications…
Dynamically compressed materials in longitudinal waves are described by two physical models: hydrostatic pressure, with equal, normal, principal stresses or material uniaxially strained in the wave propagation direction. These models are…
The diffraction peaks of Zircaloy-2 and Zr-2.5%Nb alloys at various deformations are found to be asymmetric in nature. In order to characterize the microstructure from these asymmetric peaks of these deformed alloys, X-Ray Diffraction Line…
In this paper, we mainly present a new simple, efficient and nondestructive Raman scattering analysis method to study the distribution of strain in SiGe alloy films. The method can simultaneously determine both Ge fractional composition x…
X-ray diffraction was demonstrated from shock-compressed polycrystalline metal on nanosecond time scales. Laser ablation was used to induce shock waves in polycrystalline foils of Be, 25 to 125 microns thick. A second laser pulse was used…
Series of GaN/AlN superlattices (SLs) with various periods and the same thicknesses of GaN quantum wells and AlN barriers have been investigated. X-ray diffraction, photoluminescence (PL) and transmission electron microscopy (TEM)…
We report on structural and optical properties of InGaN/GaN thin films, with a 0.46o misalignment between the surface and the (0001) plane, which were grown by metal-organic chemical vapor deposition (MOCVD) on 0.34o miscut sapphire…
Thanks to its high refractive index contrast, band gap and polarization mismatch compared to GaN, In0.17Al0.83N layers lattice-matched to GaN are an attractive solution for applications such as distributed Bragg reflectors, ultraviolet…
Efficient thermal management is essential for the reliability of modern power electronics, where increasing device density leads to severe heat dissipation challenges. However, in thin-film systems, thermal transport is often compromised by…
Gallium oxide is a wide-bandgap semiconductor which has been steadily growing in popularity due to its ultra-wide bandgap, suitability for harsh environments and distinctive opto-electrical properties. Notable applications include deep-UV…
The depth dependence of crystalline structure within thin films is critical for many technological applications, but has been impossible to measure directly using common techniques. In this work, by monitoring diffraction peak intensity and…
An in situ study of the epitaxial growth of SmN thin films on Ga-polar GaN (0001)templates by molecular beam epitaxy is reported. Using X-ray photoelectron spectroscopy we found that Ga segregates at the surface during the first stages of…
Amorphous, glass, and glass-ceramic materials practically always include a significant number (more than eight) of crystalline phases, with the contents of the latter ranging from a few wt.% to several hundredths or tenths of wt.%. The…
We use mid-infrared spectral decomposition to separate the 6micron mid-infrared AGN continuum from the host emission in the ISO low resolution spectra of 71 active galaxies and compare the results to observed and intrinsic 2-10keV hard…
Attaining low resistivity AlGaN layers is the keystone to improve the efficiency of light emitting devices in the ultraviolet spectral range. Here, we present a microstructural analysis of Ge-doped AlGaN samples with Al mole fraction from…
High real-space resolution atomic pair distribution functions (PDF)s from the alloy series Ga_1-xIn_xAs have been obtained using high-energy x-ray diffraction. The first peak in the PDF is resolved as a doublet due to the presence of two…
The optical properties of BAlN and BGaN ternary alloys are investigated using first-principle calculation. Hybrid density functional theory is applied to determine the refractive indices of different alloys. A peculiar non-linear behavior…