Related papers: Coaxial p- and n-type carbon nanotube transistors …

High performance p- and n-type single-walled carbon nanotube (SWNT) field-effect transistors (FETs) are obtained by using high and low work function metals, Pd and Al as source/drain (S/D) electrodes respectively. Ohmic contacts made to…

Short channel (~80 nm) n-type single-walled carbon nanotube (SWNT) field-effect transistors (FETs) with potassium (K) doped source and drain regions and high-k gate dielectrics (ALD HfO2) are obtained. For nanotubes with diameter ~ 1.6 nm…

Single-walled carbon nanotubes (SWNTs) have been grown via chemical vapor deposition on high-kappa dielectric SrTiO3/Si substrates, and high-performance semiconducting SWNT field-effect transistors have been fabricated using the thin SrTiO3…

High-performance single-wall carbon nanotube field-effect transistors (SWNT-FETs) are fabricated using directed assembly and mass-produced carbon nanotubes (CNTs). These FETs exhibit operating characteristics comparable to state-of-the-art…

Substantial progress on field effect transistors "FETs" consisting of semiconducting single wall carbon nanotubes "s-SWNTs" without detectable traces of metallic nanotubes and impurities is reported. Nearly perfect removal of metallic…

High performance enhancement mode semiconducting carbon nanotube field-effect transistors (CNTFETs) are obtained by combining ohmic metal-tube contacts, high dielectric constant HfO2 films as gate insulators, and electrostatically doped…

State-of-the-art carbon nanotube field-effect transistors (CNFETs) behave as Schottky barrier (SB)-modulated transistors. It is known that vertical scaling of the gate oxide significantly improves the performance of these devices. However,…

We present a simple and scalable technique for the fabrication of solution processed & local gated carbon nanotube field effect transistors (CNT-FETs). The approach is based on directed assembly of individual single wall carbon nanotube…

Junctionless transistors made of silicon have previously been demonstrated experimentally and by simulations. Junctionless devices do not require fabricating an abrupt source-drain junction and thus can be easier to implement in aggressive…

We investigate electronic transport properties of Schottky-barrier field-effect transistors (FET) based on double-walled carbon nanotubes (DWNT) with a semiconducting outer shell and a metallic inner one. These kind of DWNT-FET show…

A vertical partial gate carbon nanotube (CNT) field-effect transistor (FET), which is amenable to the vertical CNT growth process and offers the potential for a parallel CNT array channel, is simulated using a self-consistent atomistic…

Carbon Nanotube (CNT) appears as a promising candidate to shrink field-effect transistors (FET) to the nanometer scale. Extensive experimental works have been performed recently to develop the appropriate technology and to explore DC…

Single electron transistors (SETs) made from single wall carbon nanotubes (SWCNTs) are promising for quantum electronic devices operating with ultra-low power consumption and allow fundamental studies of electron transport. We report on…

The electrostatic coupling between singled-walled carbon nanotube (SWNT) networks/arrays and planar gate electrodes in thin-film transistors (TFTs) is analyzed both in the quantum limit with an analytical model and in the classical limit…

Most carbon nanotube field-effect transistors (CNTFETs) directly attach metal source/drain contacts to an intrinsic nanotube channel. When the gate oxide thickness is reduced, such transistors display strong ambipolar conduction, even when…

Single electron transistors (SETs) are fabricated by placing single walled carbon nanotubes (SWNTs) on a 100 nm wide local Al/Al2O3 bottom gate and then contacting with Pd electrodes. Coulomb oscillations up to 125 K were observed and…

A simple method to calculate the static electric polarization of single-walled carbon nanotube (SWNT) is obtained within the second-order perturbation approximation. The results are in agreement with the previous calculation within the…

We have fabricated air-stable n-type, ambipolar carbon nanotube field effect transistors (CNFETs), and used them in nanoscale memory cells. N-type transistors are achieved by annealing of nanotubes in hydrogen gas and contacting them by…

In this work, we simulate the expected device performance and the scaling perspectives of Carbon nanotube Field Effect Transistors (CNT-FETs), with doped source and drain extensions. The simulations are based on the self-consistent solution…

Single-walled carbon nanotubes are promising nanoelectronic materials but face long-standing challenges including production of pure semiconducting SWNTs and integration into ordered structures. Here, highly pure semiconducting…