Related papers: Growth of Epitaxial Tungsten Nanorods
We report epitaxial synthesis of superconducting CsxWO3 (x = 0.11, 0.20, 0.31) films on Y-stabilized ZrO2 (111) substrates. The hexagonal crystal structure was verified not only for composition within the stable region of bulk (x = 0.20,…
Nanorods grow in two modes through physical vapor deposition (PVD). In mode I, monolayer surface steps dictate the diameter of nanorods. In mode II, multiple-layer surface steps dictate the diameter, which is the smallest possible under…
Tungstite (WO3.H2O) nanoparticles were synthesized using a simple and inexpensive low temperature and low pressure hydrothermal method by adding hydrochloric acid to diluted sodium tungstate solutions (Na2WO4.2H2O) at temperatures below…
Growth evolution of InN nanostructures via a chemical vapor deposition technique is reported using In_2O_3 as precursor material and NH_3 as reactive gas in the temperature range of 550-700 ^oC. Morphology of the nanostructures solely…
Potassium tungsten bronzes (K$_x$WO$_3$) are nonstoichiometric oxides in which alkali ions, i.e., K+, occupy one-dimensional tunnels of the hexagonal WO6 framework, enabling coupled ionic-lectronic transport. While their bulk and…
Single layer hexagonal boron nitride is produced on 2 inch Pt(111)/sapphire wafers. The growth with borazine vapour deposition at process temperatures between 1000 and 1300 K is in-situ investigated by photoelectron yield measurements. The…
We report a study on the growth of NiBi3 nanowires and nanorods during the preparation of superconducting NiBi3 films by co-evaporation of Ni and Bi. We find that NiBi3 films grown via co-evaporation of Ni and Bi metals achieve higher…
We present a complete characterisation at the nanoscale of the growth and structure of single-layer tungsten disulfide (WS$_2$) epitaxially grown on Au(111). Following the growth process in real time with fast x-ray photoelectron…
Heteroepitaxial spinel ferrites NiFe2O4 and CoFe2O4 films have been prepared by pulsed laser deposition (PLD) at various temperatures (175 - 690 {\deg}C) under ozone/oxygen pressure of 10 mTorr. Due to enhanced kinetic energy of ablated…
Conventional vapor deposition or epitaxial growth of two-dimensional (2D) materials and heterostructures is conducted in a large chamber in which masses transport from the source to the substrate. Here we report a chamber-free, on-chip…
ZnO is a promising material for the fabrication of light emitting devices. One approach to achieve this goal is to use ZnO nanorods because of their expected high crystalline and optical quality. Catalyst free growth of nanorods by…
Transition metal dichalcogenide (TMD) monolayers and heterostructures have emerged as a compelling class of materials with transformative new science that may be harnessed for novel device technologies. These materials are commonly…
We have investigated the formation of tungsten oxide nanowires under different CVD conditions. We find that exposure of oxidized tungsten films to hydrogen and methane at 900C leads to the formation of a dense array of typically 10 nm…
Orientation, structure and morphology in the early growth stages of CuO films on strontium titanate were studied by synchrotron radiation X-ray diffraction. Nanostructured CuO films were obtained by ex situ heat treatment at 970 K in oxygen…
The ability to synthesis well-ordered two-dimensional materials under ultra-high vacuum and directly characterize them by other techniques in-situ can greatly advance our current understanding on their physical and chemical properties. In…
In this study we report on a novel two-step epitaxial growth technique that enables a significant improvement of the crystal quality of nitrogen-polar GaN. The starting material is grown on 4{\deg} vicinal sapphire substrates by metal…
The fabrication of nanostructures with controlled assembly and architecture is significant for the development of novel nanomaterials-based devices. In this work we demonstrate that laser techniques coupled with low-temperature hydrothermal…
WO3-x thinfilms featuring petal-like and lamella-like nanostructures are grown under controlled oxygen partial pressures using hot filament chemical vapor deposition. These synthesized WO3-x nanostructures exhibit monoclinic structure and…
Superconducting epitaxial FeSe0.5Te0.5 thin films were prepared on SrTiO3 (001) substrates by pulsed laser deposition. The high purity of the phase, the quality of the growth and the epitaxy were studied with different experimental…
Nanowire (NW) crystal growth via the vapour_liquid_solid mechanism is a complex dynamic process involving interactions between many atoms of various thermodynamic states. With increasing speed over the last few decades many works have…