Related papers: High frequency Scanning Gate Microscopy and local …
We use conducting-tip atomic force microscopy (AFM) to measure local electronic properties of single wall carbon nanotube (SWNT) circuits on insulating substrates. When a voltage is applied to the tip and AFM feedback is used to position…
Electronic transport in semiconducting single-wall carbon nanotubes is studied by combined scanning gate microscopy and scanning impedance microscopy (SIM). Depending on the probe potential, SIM can be performed in both invasive and…
The influence of defects on electron transport in single-wall carbon nanotube field effect transistors (CNFETs) is probed by combined scanning gate microscopy (SGM) and scanning impedance microscopy (SIM). SGM reveals a localized field…
We analyze electrostatic interaction between a sharp conducting tip and a thin one-dimensional wire, e.g., a carbon nanotube, in a scanned gate microscopy (SGM) experiment. The problem is analytically tractable if the wire resides on a thin…
We report on microwave operation of top-gated single carbon nanotube transistors. From transmission measurements in the 0.1-1.6 GHz range, we deduce device transconductance gm and gate-nanotube capacitance Cg of micro- and nanometric…
We report on the influence of low gamma irradiation (10^4 Gy) on the noise properties of individual carbon nanotube (CNT) field-effect transistors (FETs) with different gate configurations and two different dielectric layers, SiO2 and…
Substantial progress on field effect transistors "FETs" consisting of semiconducting single wall carbon nanotubes "s-SWNTs" without detectable traces of metallic nanotubes and impurities is reported. Nearly perfect removal of metallic…
Nanoscale optoelectronic components achieve functionality via spatial variation in electronic structure induced by composition, defects, and dopants. To dynamically change the local band alignment and influence defect states, a scanning…
The electrostatic coupling between singled-walled carbon nanotube (SWNT) networks/arrays and planar gate electrodes in thin-film transistors (TFTs) is analyzed both in the quantum limit with an analytical model and in the classical limit…
We use scanning photocurrent microscopy (SPCM) to investigate the properties of internal p-n junctions as well as local defects in ambipolar carbon nanotube (CNT) transistors. Our SPCM images show strong signals near metal contacts whose…
Short channel (~80 nm) n-type single-walled carbon nanotube (SWNT) field-effect transistors (FETs) with potassium (K) doped source and drain regions and high-k gate dielectrics (ALD HfO2) are obtained. For nanotubes with diameter ~ 1.6 nm…
Carbon nanotube field-effect transistor (CNTFET) refers to a field-effect transistor that utilizes a single carbon nanotube or an array of carbon nanotubes as the channel material instead of bulk silicon in the traditional MOSFET structure.…
Single-walled carbon nanotubes (SWNTs) have been grown via chemical vapor deposition on high-kappa dielectric SrTiO3/Si substrates, and high-performance semiconducting SWNT field-effect transistors have been fabricated using the thin SrTiO3…
Electrically-tunable optical properties in materials are desirable for many applications ranging from displays to lasing and optical communication. In most two-dimensional thin-films and other quantum confined materials, these constants…
We use numerical simulations to analyze recent experimental measurements of short-channel carbon nanotube field-effect transistors with palladium contacts. We show that the gate strongly modulates the contact properties, an effect that is…
Carbon nanotube field-effect transistors (CNT FETs) have been proposed as possible building blocks for future nano-electronics. But a challenge with CNT FETs is that they appear to randomly display varying amounts of hysteresis in their…
Effect of contact interfaces, between metallic single-wall carbon nanotubes (SWCNT) and external electrodes made also of nanotubes, on the electrical conductance is studied. A tight-binding model with both diagonal and off-diagonal…
Applications based on Single Walled Carbon Nanotube (SWNT) are good example of the great need to continuously develop metrology methods in the field of nanotechnology. Contact and interface properties are key parameters that determine the…
We show that thin horizontal arrays of single wall carbon nanotubes (SWNTs) suspended above the channel of silicon MOSFETs can be used as vibrating gate electrodes. This new class of nano-electromechanical system (NEMS) combines the unique…
The electrical and optical response of a field-effect device comprising a network of semiconductor-enriched single-wall carbon nanotubes, gated with sodium chloride solution is investigated. Field-effect is demonstrated in a device that…