Related papers: Room-temperature, continuous wave lasing in planar…
We investigate an acoustical analog of circuit quantum electrodynamics that facilitates compact high-Q (${>}20,000$) microwave-frequency cavities with dense spectra. We fabricate and characterize a device that comprises a flux tunable…
We study experimentally the lasing regime of a GaAs based microcavity sample under strong optical pumping. The very same sample exhibits the strong coupling regime at low excitation power with a Rabi splitting as large as 15 meV. We show…
Precision measurements of active and reactive components of in-plane microwave surface impedance were performed in single crystals of optimally-doped Fe-based superconductor Ba(Fe1-xCox)2As2 (x = 0.074, Tc = 22.8 K). Measurements in a…
We present an approach to mitigate coating thermal noise in optical cavities by using multiple TEM spatial modes to readout and stabilize laser frequency. With optimal weightings we synthesize a wider sampling of the mirror surface,…
The in-plane and out-of-plane surface impedance and microwave conductivity components of one and the same YBa_2Cu_3O_{7-x} (0.07\le x\le 0.47) single crystal are determined in the wide ranges of temperature T and carrier concentration p in…
Langmuir probe techniques have been used to study time and spatially resolved electron densities and electron temperatures in pulse-modulated hydrogen discharges in two different planar microwave reactors (fmicrowave= 2.45 GHz, tpulse= 1…
We design and fabricate large-area (1.1 mm $\times$ 1.1 mm) photonic crystal quantum cascade lasers, enabling single-mode (wavelength $\sim$ 8.5 $\mu$m) surface emission at room temperature, with a maximum peak power up to 176 mW. The beam…
Three-mode parametric instability is a threat to attaining design power levels in Advanced gravitational wave detectors. The first observation of three-mode parametric instability in a long optical cavity revealed that instabilities could…
A laser with an active volume consisting of only a single quantum wire in the 1-dimensional (1-D) ground state is demonstrated. The single wire is formed quantum-mechanically at the T-intersection of a 14 nm Al_{0.07}Ga_{0.93}As quantum…
Elastic dissipation through radiation towards the substrate is a major loss channel in micro- and nanomechanical resonators. Engineering the coupling of these resonators with optical cavities further complicates and constrains the design of…
The influence of external pressure on the charge-density-wave (CDW) ground state of the quasi-one-dimensional two-leg ladder compound Sr$_{10}$Ca$_{4}$Cu$_{24}$O$_{41}$ has been studied by optical reflectivity measurements as a function of…
We present the design of a reflective stop-band filter based on quasi-lumped elements that can be utilized to introduce large dc and low-frequency voltage biases into a low-loss superconducting coplanar waveguide (CPW) cavity. Transmission…
Measuring the internal quality factor of coplanar waveguide superconducting resonators is an established method of determining small losses in superconducting devices. Traditionally, the resonator losses are only attributed to two-level…
Semiconductor exciton-polaritons in planar microcavities form coherent two-dimensional condensates in non-equilibrium. However, coupling of multiple lower-dimensional polariton quantum systems, critically needed for polaritonic quantum…
In order to achieve polariton lasing at room temperature, a new fabrication methodology for planar microcavities is proposed: a ZnO-based microcavity in which the active region is epitaxially grown on an AlGaN/AlN/Si substrate and in which…
Microcavity polaritons are strongly interacting hybrid light-matter quasiparticles, which are promising for the development of novel light sources and active photonic devices. Here, we report polariton lasing in the UV spectral range in…
Vertical cavity surface emitting terahertz lasers can be realized in conventional semiconductor microcavities with embedded quantum wells in the strong coupling regime. The cavity is to be pumped optically at half the frequency of the 2p…
3D printing of plastics, ceramics, and metals has existed for several decades and has revolutionized many areas of manufacturing and science. Printing of metals in particular has found a number of applications in fields as diverse as…
We report on the operation of a double metal waveguide far-infrared quantum cascade laser emitting at 28 $\mu$m, corresponding to the AlAs-like phonon Reststrahlen band. To avoid absorption by AlAs-like optical phonons, the Al-free group-V…
Tantalum thin films sputtered on unheated silicon substrates are characterized with microwaves at around 10 GHz in a 10 mK environment. We show that the phase of tantalum with a body-centered cubic lattice ($\alpha$-Ta) can be grown…