Related papers: Hierarchically Engineered Titanium Suboxide Films …
MgB2 thin films were cold-grown on sapphire substrates by pulsed laser deposition (PLD), followed by post-annealing in mixed, reducing gas, Mg-rich, Zr gettered, environments. The films had Tcs in the range 29 K to 34 K, Jcs (20K, H=0) in…
Thin aluminum oxide films were deposited by a new and simple physicochemical method called chemical liquid phase deposition (CLD) on semiconductor materials. Aluminum sulfate with crystallized water and sodium bicarbonate were used as…
We report on the fabrication of two-dimensional periodic photonic nanostructures by nanoimprint lithography and dry etching, and their integration into a 1-{\mu}m-thin mono-crystalline silicon solar cell. Thanks to the periodic…
Superconducting MgB2 thin films were prepared on Al2O3(0001) and MgO(100) substrates. Boron thin films were deposited by the electron-beam evaporation followed by post-annealing process with magnesium. Proper post annealing conditions were…
Ti/Al multilayer thin films with precise thickness have been deposited using a combination of dc and rf magnetron sputtering techniques. Cross-sectional transmission electron microscopy (TEM) revealed unmixed fifteen parallel and alternate…
Here we report on studying the electronic and optical material properties of the technologically-relevant material indium tin oxide (ITO) as a function of thermal annealing. In this work, ITO powder has been prepared utilizing solid-state…
Thin superconducting films of magnesium diboride (MgB2) with Tc \approx 24K were prepared on various oxide substrates by pulsed laser deposition (PLD) followed by an in-situ anneal. A systematic study of the influence of various in-situ…
Optical coatings formed from amorphous oxide thin films have many applications in precision measurements. The Advanced Laser Interferometer Gravitational-Wave Observatory (LIGO) and Advanced Virgo use coatings of SiO$_2$ (silica) and…
The use of $\alpha$-tantalum in superconducting circuits has enabled a considerable improvement of the coherence time of transmon qubits. The standard approach to grow $\alpha$-tantalum thin films on silicon involves heating the substrate,…
Colloidal nanocrystals are a promising fluorescent class of materials, whose spontaneous emission features can be tuned over a broad spectral range via their composition, geometry and size. However, towards embedding nanocrystals films in…
In2S3(1-x)O3x is known from preceding studies to have a bandgap varying continuously as a function of x, the reason why this solid solution is potentially interesting in the field of photovoltaics. In this work, we present results on…
This paper presents modelled results for optical absorption in ultra-thin films of nickel, gold and silver across the solar spectrum. It is found in the case of nickel there is an optimum thickness for maximum solar absorption around…
Ga2O3 thin films were deposited by reactive magnetron sputtering from a liquid gallium target. The influence of deposition temperature, substrate type, and discharge parameters on the structural and electrical properties was systematically…
We use free-standing TiO2 nanotube membranes that are transferred onto FTO slides in front-side illuminated dye-sensitized solar cells (DSSCs). We investigate the key parameters for solar cell arrangement of self-ordered anodic TiO2…
Inherent properties of superconducting Bi2Sr2CaCu2O8+x films, such as the high superconducting transition temperature Tc, efficient Josephson coupling between neighboring CuO layers, and fast quasiparticle relaxation dynamics, make them a…
Titanium oxides have many fascinating optical and electrical properties, such as the superconductivity at 2.0 K in cubic titanium monoxide TiO polycrystalline bulk. However, the lack of TiO single crystals or epitaxial films has prevented…
Tin (IV) oxide (SnO2) sols have been synthesized from SnCl2.2H2O precursor solution by applying two different processing conditions. The prepared sols were then deposited on UV-Ozone treated quartz and soda lime glass (SLG) substrates by…
Thin-film solar cells that are considered as the second generation of solar cells are known for their low cost and acceptable efficiency. In this technology, semiconductor layers with a thickness of micrometer are deposited on thick enough…
Thin films of cadmium stannate was prepared using low cost cadmium acetate and tin (II) chloride precursors by spray pyrolysis technique at three different substrate temperatures of 400, 450 and 5000 C. A novel procedure of simultaneously…
Here we demonstrate the controlled growth of Bi(110) and Bi(111) films on an (insulating) $\alpha$-Al$_2$O$_3$(0001) substrate by surface X-ray diffraction and X-ray reflectivity using synchrotron radiation. At temperatures as low as 40 K,…