Related papers: Hierarchically Engineered Titanium Suboxide Films …
Simple vacuum evaporation technique for deposition of dyes on various solid surfaces has been developed. The method is compatible with conventional solvent-free nanofabrication processing enabling fabrication of nanoscale optoelectronic…
The diffusion of substrate material into absorbing layer and oxidation of metal substrate or cermet metal nanoparticles at high temperatures are known as inevitable problems of the solar selective absorbers. In this study, we consider the…
Ta (100 nm) / NdFeB (5 $\mu$m) / Ta (100 nm) films have been deposited onto Si substrates using triode sputtering (deposition rate ~ 18 $\mu$m/h). A 2-step procedure was used : deposition at temperatures up to 400 C followed by ex-situ…
Superconducting films of alpha-Ta are promising candidates for the fabrication of advanced superconducting qubits. However, alpha-Ta films suffer from many growth-induced structural inadequacies that negatively affect their performance. We…
Vanadium dioxide is a complex oxide material, which shows large resistivity and optical reflectance change while transitioning from the insulator to metal phase at ~68 {\deg}C. In this work, we use a modified atmospheric thermal oxidation…
Mechanical exfoliation of bulk crystals has been widely used to obtain thin topological insulator (TI) flakes for device fabrication. However, such a process produces only micro-sized flakes that are highly irregular in shape and thickness.…
Light trapping in planar ultrathin-film solar cells is limited due to a small number of optical modes available in the thin-film slab. A nanostructured thin-film design could surpass this limit by providing broadband increase in the local…
We present state-of-the-art first-principle calculations of the electronic and optical properties of silicon allotropes with interesting characteristics for applications in thin-film solar cells. These new phases consist of distorted sp$^3$…
In this work we study the optoelectronic properties of individual TiO2 fibres produced through coupled sol-gel and electrospinning, by depositing them onto pre-patterned Ti/Au electrodes on SiO2/Si substrates. Transport measurements in the…
Nanocrystals of indium oxide (In$_2$O$_3$) with sizes below 10 nm were prepared in alumina matrixes by using a co-pulverization method. The used substrates such as borosilicate glasses or (100) silicon as well as the substrate temperatures…
The ultra-wide bandgap, high breakdown electric field, and large-area affordable substrates make \b{eta}-Ga2O3 promising for applications of next-generation power electronics while its thermal conductivity is at least one order of magnitude…
In this work, we have demonstrated wide-composition-range \b{eta}-(AlxGa1-x)2O3 thin films with record-high Al compositions up to 77% for \b{eta}-(AlxGa1-x)2O3 covering bandgaps from 4.9 to 6.4 eV. With optimized thermal annealing…
Great emphasis is placed on the development of integrated approaches for the synthesis and the characterization of ad hoc nanostructured platforms, to be used as templates with controlled morphology and chemical properties for the…
Vanadium (IV) oxide is one of the most promising materials for thermochromic films due to its unique, reversible crystal phase transition from monoclinic (M1) to rutile (R) at its critical temperature (T$_c$) which corresponds to a change…
In this paper, we study the solar selective absorbing properties of metal nanowire array (NWA) / anodic aluminum oxide (AAO) composites at 1000 K via numerical simulation. The materials and structural parameters which influence the…
We have studied the effects of oxygen on hydrogenated amorphous/crystalline silicon films in terms of their structural and optical properties. Different hydrogenated silicon oxide (SiO:H) and silicon (Si:H) films are fabricated between…
We report the direct observation of superconductivity in nitridized-aluminum thin films. The films are produced by sputtering deposition of aluminum in a controlled mixture of nitrogen diluted in argon. The concentration of applied nitrogen…
This paper introduces the design and comprehensive characterization of a novel three-layer metamaterial absorber, engineered to exploit the unique optical properties of gold, vanadium dioxide, and silicon dioxide. At the core of this…
Optimized DC magnetron sputtering system for the deposition of transparent conductive oxides (TCOs), such indium tin oxide (ITO) on glass substrate has been applied in order to achieve low-emitting (low-e) transparent coatings. To obtain…
Thin films of MgB2 superconductor were prepared by three different procedures on sapphire and silicon substrates. Boron thin films, ex-situ annealed in magnesium vapour, resulted in textured polycrystalline films with crystal dimensions…