Related papers: Low barrier ZrO$_x$-based Josephson junctions
Deep submicron Al-AlOx-Nb tunnel junctions and single electron transistors with niobium islands were fabricated by electron beam gun shadow evaporation. Using stencil masks consisting of the thermostable polymer polyethersulfone (PES) and…
Vertical integration of superconducting electronics requires fabrication strategies that preserve pristine interfaces while accommodating oxidation-sensitive elemental superconductors. However, existing van der Waals-based vertical…
Decoherence remains a critical obstacle to achieving high-fidelity, scalable superconducting qubits, with the tunnel barrier of Josephson junctions a key source of loss. Here we apply resonant X-ray reflectivity to non-destructively probe…
We present a method for fabricating Josephson junctions and superconducting quantum interference devices (SQUIDs) which is based on the local anodization of niobium strip lines 3 to 6.5 nm-thick under the voltage-biased tip of an Atomic…
The current-voltage characteristics of Au/InOx/Pb tunnel junctions exhibit peculiar zero-bias anomalies. At low temperature the zero-bias resistance attains values that are smaller than the normal state resistance by a factor that often…
Josephson tunneling in twisted cuprate junctions provides a litmus test for the pairing symmetry, which is fundamental for understanding the microscopic mechanism of high temperature superconductivity. This issue is rekindled by…
By imposing the constraints of structural compatibility, stability and a large tunneling magneto-resistance, we have identified the Fe$_3$Al/BiF$_3$/Fe$_3$Al stack as a possible alternative to the well-established FeCoB/MgO/FeCoB in the…
We demonstrate a local strain sensing method for nanostructures based on metallic Al tunnel junctions with AlOx barriers. The junctions were fabricated on top of a thin silicon nitride membrane, which was actuated with an AFM tip attached…
The most commonly used physical realization of superconducting qubits for quantum circuits is a transmon. There are a number of superconducting quantum circuits applications, where Josephson junction critical current reproducibility over a…
Atomic Layer Deposition (ALD) is a promising technique for producing Josephson junctions (JJs) with lower defect densities for qubit applications. A key problem with using ALD for JJs is the interfacial layer (IL) that develops underneath…
High critical current-density (10 to 420 kA/cm^2) superconductor-insulator-superconductor tunnel junctions with aluminium nitride barriers have been realized using a remote nitrogen plasma from an inductively coupled plasma source operated…
The Josephson junction (JJ) is the corner stone of superconducting electronics and quantum information processing. While the technology for fabricating low $T_{c}$ JJ is mature and delivers quantum circuits able to reach the "quantum…
On the road of searching for Majorana zero modes (MZMs) in topological insulator-based Josephson junctions, a highly-sought signature is the protected full transparency of electron transport through the junctions due to the existence of the…
Nb/Al_2O_3/Ni_{0.6}Cu_{0.4}/Nb based superconductor-insulator-ferromagnet-superconductor (SIFS) Josephson tunnel junctions with a thickness step in the metallic ferromagnetic \Ni_{0.6}\Cu_{0.4} interlayer were fabricated. The step was…
Hydrogen contamination in Josephson junctions is a potential source of device-to-device variability and two-level-system loss in superconducting qubits. In this work, we investigate hydrogen incorporation in oxidized aluminum barriers by…
We present a structure and a fabrication method for superconducting tunnel junctions down to the dimensions of 200 nm using i-line UV lithography. The key element is a side-wall-passivating spacer structure (SWAPS) which is shaped for…
We report on the fabrication of Nb/AlO_x/Pd_{0.82}Ni_{0.18}/Nb superconductor/insulator/ferromagnetic metal/superconductor (SIFS) Josephson junctions with high critical current densities, large normal resistance times area products, high…
Nb and its compounds are widely used in quantum computing due to their high superconducting transition temperatures and high critical fields. Devices that combine superconducting performance and spintronic non-volatility could deliver…
Scalable quantum computing currently requires a large array of qubit integration, but present two-dimensional interconnects face challenges such as wiring congestion, electromagnetic interference, and limited cryogenic space. To overcome…
We investigate the current-voltage characteristics of high-transparency superconductor-insulator-normal metal (SIN) junctions with the specific tunnel resistance below 30 kOhm per square micron. The junctions were fabricated from different…