Related papers: Grid-Forming Vector Current Control FRT Modes Unde…
This paper presents the development of "Control-Sync," a novel firmware for universal inverters in microgrids, designed to enhance grid stability and flexibility. As hybrid PV-battery systems become increasingly prevalent, there is a…
We analyze a dual-port grid-forming (GFM) control for power systems containing ac and dc transmission, converter-interfaced generation and energy storage, and legacy generation. To operate such a system and provide standard services,…
HVDC-connected offshore wind power plants (OWPPs) are expected to provide inertial response and frequency containment reserve (FCR) to help address the frequency control challenges caused by the growing penetration of power electronics in…
Data center loads have expanded significantly in recent years. Compared to traditional loads, data centers are highly sensitive to voltage deviations and thus their protection mechanisms trip more proactively during voltage fluctuations.…
Interconnecting power converters (IPC) are the main elements enabling the interconnection of multiple high-voltage alternating current (HVAC) and high-voltage direct current (HVDC) subgrids. These converters can be classified either as…
This paper presents a novel grid-forming voltage control strategy for a battery energy storage system to maintain balanced three-phase output voltages when serving unbalanced loads. A stationary reference frame ($\alpha \beta$) based…
Algorithms that adjust the reactive power injection of converter-connected RES to minimize losses may compromise the converters' fault-ride-through capability. This can become crucial for the reliable operation of the distribution grids, as…
The classic design of grid-forming control strategies for power converters rely on the stringent assumption of the timescale separation between DC and AC states and their corresponding control loops, e.g., AC and DC loops, power and…
High-voltage direct-current (HVDC) systems for constant or intermittent power delivery have recently been developed further to support grid frequency regulation (GFR). This paper proposes a new control strategy for a line-commutated…
Grid-forming control (GFC) has seen numerous technological advances in their control types, applications, and the multitude of services they provide. Some examples of the services they provide include black start, inertial frequency…
Most previously proposed controllers are analyzed in the small-signal/quasi-steady regime rather than large-signal or transient stability for grid-forming inverters (GFMI). Additionally, methods that presume system-wide data--global…
A multi-input multi-output based grid-forming (MIMO-GFM) converter has been proposed using multivariable feedback control, which has been proven as a superior and robust system using low-order controllers. However, the original MIMO-GFM…
This work introduces a novel dispatchable current source virtual oscillator control (dCVOC) scheme for grid-following (GFL) converters, which exhibits duality with dispatchable virtual oscillator control (dVOC) in two ways: a) the current…
Power electronic converters enable wind turbines, operating at variable speed, to generate electricity more efficiently. Among variable speed operating turbine generators, permanent magnetic synchronous generator (PMSG) has got more…
In this paper, a new fault tolerant dc-ac converter-fed induction motor drive is proposed to maintain motor as close as possible to its desired normal operation under open- and short-circuit switch failures. The operational principles for…
Stability of power grids with synchronous generators (SGs) and renewable generation interfaced with grid-forming converters (GFCs) under dc-side current limitation is studied. To that end, we first consider a simple 2-bus test system and…
The active and reactive power controllers of grid-forming converters are traditionally designed separately, which relies on the assumption of loop decoupling. This paper proposes a full-state feedback control for the power loops of…
Grid-forming voltage source converters (GFM-VSCs) play a crucial role in the stability of power systems with large amounts of converter-based generation. Transient stability (angle stability under large disturbances) is a critical limiting…
PUBLISHED ON IEEE/ASME TRANSACTIONS ON MECHATRONICS, DOI: 10.1109/TMECH.2021.3100150. Ideally, accurate sensor measurements are needed to achieve a good performance in the closed-loop control of mechatronic systems. As a consequence, sensor…
With the increasing interest in converter-fed islanded microgrids, particularly for resilience, it is becoming more critical to understand the dynamical behavior of these systems. This paper takes a holistic view of grid-forming converters…