Related papers: Native-oxide-passivated trilayer junctions for sup…
Nanoscale superconductor-semiconductor hybrid devices are assembled from InAs semiconductor nanowires individually contacted by aluminum-based superconductor electrodes. Below 1 K, the high transparency of the contacts gives rise to…
Josephson junctions made from aluminium and its oxide are the most commonly used functional elements for superconducting circuits and qubits. It is generally known that the disordered thin-film AlOx contains atomic tunneling systems.…
Conventional superconducting flux qubits require the application of a precisely tuned magnetic field to set the operation point at half a flux quantum through the qubit loop, which complicates the on-chip integration of this type of device.…
Low-loss inductors are essential components in various superconducting circuits, such as qubits or digital electronics. In this study, we investigate highly compact inductors formed by vertical stacking of Josephson junctions. Our…
Qubit information processors are increasing in footprint but currently rely on e-beam lithography for patterning the required Josephson junctions (JJs). Advanced optical lithography is an alternative patterning method, and we report on the…
More and more materials, with a growing variety of properties, are built into electronic devices. This is motivated both by increased device performance and by the studies of materials themselves. An important type of device is a Josephson…
Semiconductor-superconductor hybrid systems provide a promising platform for hosting unpaired Majorana fermions towards the realisation of fault-tolerant topological quantum computing. In this study, we employ the Keldysh Non-Equilibrium…
Van-der-Waals (vdW) assembly enables the fabrication of novel Josephson junctions utilizing an atomically sharp interface between two exfoliated and relatively twisted $\rm{Bi_2Sr_2CaCu_2O_{8+x}}$ (Bi2212) flakes. In a range of twist angles…
We report on the fabrication and electrical transport properties of superconducting junctions made of \beta-Ag$_{2}$Se topological insulator (TI) nanowires in contact with Al superconducting electrodes. The temperature dependence of the…
We have developed a novel fabrication process for ultra-small, full-epitaxial NbN Josephson junctions on a silicon (Si) substrate. A full-epitaxial NbN/AlN/NbN tri-layer was grown on a Si (100) wafer with a (200)-oriented TiN buffer layer.…
To increase density of superconductor digital and neuromorphic circuits by 10x and reach integration scale of $10^8$ Josephson junctions (JJs) per chip, we developed a new fabrication process on 200-mm wafers, using self-shunted…
Superconducting circuits with Josephson junctions are promising candidates for developing future quantum technologies. Of particular interest is to use these circuits to study effects that typically occur in complex condensed-matter…
Superconducting junctions with a ferromagnet as the weak link, where triplet correlations can transport supercurrents over a substantial distance, have been of long-standing interest. In this work, we study the triplet transport in planar…
There are two elementary superconducting qubit types that derive directly from the quantum harmonic oscillator. In one the inductor is replaced by a nonlinear Josephson junction to realize the widely used charge qubits with a compact phase…
Establishment of phase-coherence and a non-dissipative (super)current between two weakly coupled superconductors, known as the Josephson effect, plays a foundational role in basic physics and applications to metrology, precision sensing,…
Superconducting quantum circuits are promising platforms for scalable quantum computing, where qubit coherence is critically determined by microscopic defects in the oxide tunneling barrier of Josephson junctions. Amorphous Al$_2$O$_3$ is…
We present our new fabrication Process for Superconductor Electronics (PSE2) that integrates two (2) layers of Josephson junctions in a fully planarized multilayer process on 200-mm wafers. The two junction layers can be, e.g., conventional…
The performance of various superconducting devices operating at ultra-low temperatures is impaired by the presence of non-equilibrium quasiparticles. Inelastic quasiparticle (QP) tunneling across Josephson junctions in superconducting…
Atomic layer deposition (ALD) provides a promising approach for deposition of ultrathin low-defect-density tunnel barriers, and it has been implemented in a high-vacuum magnetron sputtering system for in situ deposition of ALD-Al2O3 tunnel…
Nonequilibrium quasiparticles are ubiquitous in superconducting electronics. These quasiparticles can trap in the internal Andreev bound states of a phase-biased Josephson junction, providing a mechanism for studying their presence and…