Related papers: A 65-nm Reliable 6T CMOS SRAM Cell with Minimum Si…

In this paper, we present a new 9T SRAM cell that has good write-ability and improves read stability at the same time. Simulation results show that the proposed design increases Read SNM (RSNM) and Ion/Ioff of read path by 219% and 113%,…

This paper addresses a novel five-transistor (5T) CMOS SRAM design with high performance and reliability in 65nm CMOS, and illustrates how it reduces the dynamic power consumption in comparison with the conventional and low-power 6T SRAM…

The SRAM cell is made up of latch, which ensures that the cell data is preserved as long as power is turned on and refresh operation is not required for the SRAM cell. SRAM is widely used for on-chip cache memory in microprocessors, game…

This paper presents a low-power cache architecture based on the series interconnection of conventional 6-transistor static random-access memory (6T SRAM) cells. The proposed approach aims to reduce leakage power in SRAM-based cache memories…

Conventional 6T SRAM is used in microprocessors in the cache memory design. The basic 6T SRAM cell and a 6 bit memory array layout are designed in LEdit. The design and analysis of key SRAM components, sense amplifiers, decoders, write…

The complementary field-effect transistors (CFETs), featuring vertically stacked n/p-FETs, enhance integration density and significantly reduce the area of standard cells such as static random-access memory (SRAM). However, the advantage of…

Memory accounts for a considerable portion of the total power budget and area of digital systems. Furthermore, it is typically the performance bottleneck of the processing units. Therefore, it is critical to optimize the memory with respect…

Crossbar arrays using emerging non-volatile memory technologies such as Resistive RAM (ReRAM) offer high density, fast access speed and low-power. However the bandwidth of the crossbar is limited to single-bit read/write per access to avoid…

There is an extremely high demand for a high speed, low power, low leakage, and low noise Static Random-Access Memory (SRAM) for high performance cache memories. The energy efficiency of SRAM is of paramount importance in both high…

This work proposes a methodology to estimate the statistical distribution of the probability that a 6T bit-cell starts up to a given logic value in SRAM memories for PUF applications. First, the distribution is obtained experimentally in a…

Sub/Near-threshold static random-access memory (SRAM) design is crucial for addressing the memory bottleneck in energy-constrained applications. However, the high integration density and reliability under process variations demand an…

Increased process variability and reliability issues present a major challenge for future SRAM trends. Non-intrusive and accurate SRAM stability measurement is crucial for estimating yield in large SRAM arrays. Conventional SRAM variability…

Spin Transfer Torque Random Access Memory (STT-RAM) has garnered interest due to its various characteristics such as non-volatility, low leakage power, high density. Its magnetic properties have a vital role in STT switching operations…

A non-volatile SRAM cell is proposed for low power applications using Spin Transfer Torque-Magnetic Tunnel Junction (STT-MTJ) devices. This novel cell offers non-volatile storage, thus allowing selected blocks of SRAM to be switched off…

Recent development in memory technologies has introduced Spin-Transfer Torque Magnetic RAM (STT-MRAM) as the most promising replacement for SRAMs in on-chip cache memories. Besides its lower leakage power, higher density, immunity to…

Although we may be at the end of Moore's law, lowering chip power consumption is still the primary driving force for the designers. To enable low-power operation, we propose a resonant energy recovery static random access memory (SRAM). We…

We present experimental results of the cross-section related to cosmic-ray irradiation at ground level for minimum-sized six-transistors (6T) and eight-transistors (8T) bit-cells SRAM memories implemented on a 65 nm CMOS standard…

This work explores the cross-node scaling potential of SOT-MRAM for last-level caches (LLCs) under heterogeneous system scaling paradigm. We perform extensive Design-Technology Co-Optimization (DTCO) exercises to evaluate the bitcell…

Nonvolatile phase change random access memory (PCRAM) is regarded as one of promising candidates for emerging mass storage in the era of Big Data. However, relatively high programming energy hurdles the further reduction of power…

This paper presents 6T SRAM cell-based bit-parallel in-memory computing (IMC) architecture to support various computations with reconfigurable bit-precision. In the proposed technique, bit-line computation is performed with a short WL…