Related papers: High temperature diffusion enabled epitaxy of the …
We demonstrate a thermally-activated epitaxy window for the growth of NbO at temperatures exceeding 1000 $^o$C. NbO films grown in this mode display superior structural and transport properties, which are reproducible across a window of…
Using molecular beam epitaxy (MBE) to grow multi-elemental oxides (MEO) is generally challenging, partly due to difficulty in stoichiometry control. Occasionally, if one of the elements is volatile at the growth temperature, stoichiometry…
Transition metal oxide heterostructures and interfaces host a variety of exciting quantum phases and can be grown with atomic-scale precision by utilising the intensity oscillations of $in$ $situ$ reflection high-energy electron diffraction…
Cupric oxide single crystal thin films were grown by plasma-assisted molecular beam epitaxy. X-ray diffraction, Raman spectrum and in situ reflection high-energy electron diffraction show that the thin films are 2x2 reconstructed with an…
In designing material functionalities for transition metal oxides, lattice structure and d-orbital occupancy are key determinants. However, the modulation of these two factors is inherently limited by the need to balance thermodynamic…
Epitaxial films have the potential to be used as model systems for fundamental investigations on the martensitic transformation in binary NiTi. In this paper, we discuss growth of binary NiTi thin films on single crystalline MgO substrates.…
Superconducting epitaxial FeSe0.5Te0.5 thin films were prepared on SrTiO3 (001) substrates by pulsed laser deposition. The high purity of the phase, the quality of the growth and the epitaxy were studied with different experimental…
In oxide epitaxy, the growth temperature and background oxygen partial pressure are considered as the most critical factors that control the phase stability of an oxide thin film. Here, we report an unusual case wherein diffusion of oxygen…
The thermal growth of silicon oxide films on Si in dry O2 is modelled as a dynamical system, assuming that it is basically a diffusion-reaction phenomenon. Relevant findings of the last decade are incorporated, as structure and composition…
We have grown NdBa2Cu3O7-d films under silver atomic flux by molecular beam epitaxy, which show a drastic improvement in microstructure and also crystallinity leading to 30 % enhancement in critical current density. The most remarkable…
It was experimentally found that the evolution of dielectric loss with processing temperature displays a common trend in ferroelectric and dielectric thin oxide films: firstly an increase and then a decrease in dielectric loss when the…
Higher-dimensional topological meta-materials have more flexible than one-dimensional topological materials, which are more convenient to apply and solve practical problems. However, in diffusion systems, higher-dimensional topological…
Homogeneous highly epitaxial LaSrMnO3 (LSMO) thin films have been grown on Yttria-stabilized-Zirconia (YsZ) / CeO2 buffer layers on technological relevant 4" silicon wafers using a Twente Solid State Technology B.V. (TSST) developed large…
Properties of complex oxide thin films can be tuned over a range of values as a function of mismatch, composition, orientation, and structure. Here, we report a strategy for growing structured epitaxial thermoelectric thin films leading to…
In this work, we report on the growth of high-mobility $\beta$-Ga$_2$O$_3$ homoepitaxial thin films grown at a temperature much lower than the conventional growth temperature window for metalorganic vapor phase epitaxy. Low-temperature…
The growth of atomically-flat thin films of ferroelectric PbTiO3 on SrTiO3 substrates, using molecular beam epitaxy, is reported. The main issue in the growth of these materials is the high volatility of lead. This can be largely overcome…
NiO layers were grown on MgO(100), MgO(110), and MgO(111) substrates by plasma-assisted molecular beam epitaxy under Ni-flux limited growth conditions. Single crystalline growth with a cube-on-cube epitaxial relationship was confirmed by…
Recently, Bi2O2Se is discovered as a promising two-dimensional (2D) semiconductor for next generation electronics, due to its moderate bandgap size, high electron mobility and pronounced ambient stability. Meanwhile, it has been predicted…
Pulsed-laser deposition has been used to grow epitaxial thin films of the giant-dielectric-constant material CaCu_3Ti_4O_{12} on LaAlO_3 and SrTiO_3 substrates with or without various conducting buffer layers. The latter include…
Materials with higher operating temperatures than today's state of the art can improve system performance in several applications and enable new technologies. Under most scenarios, a protective oxide scale with high melting temperatures and…