Related papers: Maximizing NMR Sensitivity: A Guide to Receiver Ga…
The signal-to-noise ratio (SNR) of a bit series written with heat-assisted magnetic recording (HAMR) on granular media depends on a large number of different parameters. The choice of material properties is essential for the obtained…
Magnetic resonance spectroscopy (MRS) offers significant diagnostic potential but is inherently constrained by low signal-to-noise ratio (SNR). While increasing the main magnetic field strength B_0 is theoretically linked to increased SNR,…
An asymptotic technique is developed to find the Signal-to-Interference-plus-Noise-Ratio (SINR) and spectral efficiency of a link with N receiver antennas in wireless networks with non-homogeneous distributions of nodes. It is found that…
In applications that involve sensor data, a useful measure of signal-to-noise ratio (SNR) is the ratio of the root-mean-squared (RMS) signal to the RMS sensor noise. The present paper shows that, for numerical differentiation, the…
In the context of the phenomenon of Stochastic Resonance (SR) we study the correlation function, the signal-to-noise ratio (SNR) and the ratio of output over input SNR, i.e. the gain, which is associated to the nonlinear response of a…
Signal-to-noise ratios are a widely used concept for astroparticle radio detectors, such as air-shower radio arrays for cosmic-ray measurements or detectors searching for radio signals induced by neutrino interactions in ice. Nonetheless,…
Many components used in signal processing and communication applications, such as power amplifiers and analog-to-digital converters, are nonlinear and have a finite dynamic range. The nonlinearity associated with these devices distorts the…
In this paper we suggest a new algorithm for determination of signal-to-noise ratio (SNR). SNR is a quantitative measure widely used in science and engineering. Generally, methods for determination of SNR are based on using of…
Signal reception of nuclear magnetic resonance (NMR) usually relies on electrical amplification of the electromotive force caused by nuclear induction. Here, we report up-conversion of a radio-frequency NMR signal to an optical regime using…
Scanning Electron Microscopy (SEM) is critical in nanotechnology, materials science, and biological imaging due to its high spatial resolution and depth of focus. Signal-to-noise ratio (SNR) is an essential parameter in SEM because it…
Nuclear Magnetic Resonance (NMR) is an intriguing quantum-mechanical effect that is used for daily life medical diagnostics and chemical analysis alike. Numerous advancements have contributed to the success of the technique, including…
Signal to Noise Ratio (SNR) is an important index for wireless communications. There are many methods for increasing SNR. In CDMA systems, spreading sequences are used. To increase SNR, we have to improve spreading sequences. In classical…
This paper proposes novel spectrum sensing algorithms for cognitive radio networks. By assuming known transmitter pulse shaping filter, synchronous and asynchronous receiver scenarios have been considered. For each of these scenarios, the…
A previous signal processing algorithm that aimed to enhance spectral changes (SCE) over time showed benefit for hearing-impaired (HI) listeners to recognize speech in background noise. In this work, the previous SCE was manipulated to…
We have developed a nuclear magnetic resonance spectrometer with a series tuned input circuit for measurements on samples at millikelvin temperatures based on an integrated two-stage superconducting quantum interference device current…
Signal-to-noise ratio (SNR) estimation is an important parameter that is required in any receiver or communication systems. It can be computed either by a pilot signal data-aided approach in which the transmitted signal would be known to…
Spectrum sensing is essential in cognitive radio to enable dynamic spectrum access. In many scenarios, primary user signal must be detected reliably in low signal-to-noise ratio (SNR) regime under required sensing time. We propose to use…
Policy-gradient methods are widely used in reinforcement learning, yet training often becomes unstable or slows down as learning progresses. We study this phenomenon through the noise-to-signal ratio (NSR) of a policy-gradient estimator,…
In this paper, we propose an analytical model to estimate the signal-to-noise ratio (SNR) at the output of an adaptive equalizer in intensity modulation and direct detection (IMDD) optical transmission systems affected by shot noise,…
The signal-to-noise ratio (SNR) is a fundamental tool to measure the performance of an image sensor. However, confusions sometimes arise between the two types of SNRs. The first one is the output-referred SNR which measures the ratio…