Related papers: Cryogenic Compact Low-Power 60GHz Amplifier for Sp…
Large-scale cryogenic quantum systems are constrained by an input-output bottleneck between room-temperature electronics and millikelvin stages, particularly in superconducting qubit platforms. This bottleneck is most acute for output…
We have fabricated a wide-bandwidth, high dynamic range, low-noise cryogenic amplifier based on a superconducting kinetic inductance traveling-wave device. The device was made from NbTiN and consisted of a long, coplanar waveguide on a…
For superconducting quantum processors, microwave signals are delivered to each qubit from room-temperature electronics to the cryogenic environment through coaxial cables. Limited by the heat load of cabling and the massive cost of…
We present a cryogenic microwave noise source with a characteristic impedance of 50 $\Omega$, which can be installed in a coaxial line of a cryostat. The bath temperature of the noise source is continuously variable between 0.1 K and 5 K…
Solid-state quantum computers require classical electronics to control and readout individual qubits and to enable fast classical data processing [1-3]. Integrating both subsystems at deep cryogenic temperatures [4], where solid-state…
A new cryogenic noise calibration source for radio astronomy receivers is presented. Dissipated power is only 4.2 mW, allowing it to be integrated with the cold part of the receiver. Measured long-term stability, sensitivity to bias…
Readout and control of qubits are limiting factors in scaling quantum computers. An ideal solution is to integrate energy-efficient cryogenic circuits close to the qubits to perform control and pre-processing tasks. With orders of magnitude…
Semiconductor spin qubits based on spin-orbit states are responsive to electric field excitation allowing for practical, fast and potentially scalable qubit control. Spin-electric susceptibility, however, renders these qubits generally…
Transition metal ions provide a rich set of optically active defect spins in wide bandgap semiconductors. Chromium (Cr4+) in silicon-carbide (SiC) produces a spin-1 ground state with a narrow, spectrally isolated, spin-selective,…
Accurate in situ calibration of microwave attenuation and amplification-chain noise is essential for superconducting quantum circuits. We demonstrate a compact, self-calibrating cryogenic noise source based on an on-chip chromium attenuator…
In this paper, design and simulation of a compact on-chip antenna for 60 GHz band applications is presented. Antenna is designed in 65nm TSMC technology. This technology consists of 9 metal layers. A 0.7 mm * 0.7 mm patch with slots is…
In this paper, a two-stage ultra-low-power operational amplifier is designed, and a comparative analysis of the proposed subthreshold complementary amplifier is presented between 180nm, 90nm, and 45nm CMOS technology. The proposed…
A robust cryogenic infrastructure in form of a wired, thermally optimized dilution refrigerator is essential for present and future solid-state based quantum processors. Here, we engineer an extensible cryogenic setup, which minimizes…
We have developed a modular interconnect platform for the control and readout of multiple solid-state qubits at cryogenic temperatures. The setup provides 74 filtered dc-bias connections, 32 control and readout connections with a bandwidth…
Operating Si quantum dot (QD) arrays requires homogeneous and ultra-dense structures with aggressive gate pitch. Such a density is necessary to separately control the QDs chemical potential (i.e. charge occupation of each QD) from the…
The challenges of operating qubits in a cryogenic environment point to a looming bottleneck for large-scale quantum processors, limited by the number of input-output connections. Classical processors solve this problem via multiplexing;…
A Cryogenic Sapphire Oscillator has been implemented at 11.2 GHz using a low-vibration design pulse-tube cryocooler. Compared with a state-of-the-art liquid helium cooled CSO in the same laboratory, the square root Allan variance of their…
A novel power-efficient analog buffer at liquid helium temperature is proposed. The proposed circuit is based on an input stage consisting of two complementary differential pairs to achieve rail-to-rail level tracking. Results of simulation…
We report the development and performance of on-chip interconnects designed to suppress electromagnetic (EM) crosstalk in spin qubit device architectures with the large number of gate electrodes needed for multi- qubit operation. Our design…
Spin-orbit effects, inherent to electrons confined in quantum dots at a silicon heterointerface, provide a means to control electron spin qubits without the added complexity of on-chip, nanofabricated micromagnets or nearby coplanar…