Related papers: Inactive Overhang in Silicon Anodes
Graphite fluoride (CFx) cathodes coupled with lithium anodes yield one of the highest theoretical energy densities (>860 Wh/g) among primary batteries. In practice, the observed discharge voltage (~2.5 V) is significantly lower than…
Lithium metal batteries (LMBs), when coupled with a localized high-concentration electrolyte and a high-voltage nickel-rich cathode, offer a solution to the increasing demand for high energy density and long cycle life. However, the…
Electro-thermal poling experiments were carried out on a bioactive glass, and the kinetics of the Na+ ion depletion layer formation under the anode was studied in-situ by means of ac impedance spectroscopy. One important finding is a linear…
Asymmetric behaviors of capacitance and charging dynamics in the cathode and anode are general for nanoporous supercapacitors. Understanding this behavior is essential for the optimal design of supercapacitors. Herein, we perform…
Transition-metal compounds pose serious challenges to first-principles calculations based on density-functional theory (DFT), due to the inability of most approximate exchange-correlation functionals to capture the localization of valence…
Key to advancing lithium-ion battery technology, and in particular fast charging capabilities, is our ability to follow and understand the dynamic processes occurring in operating materials under realistic conditions, in real time, and on…
Li-O$_2$ batteries (LOB) performance degradation ultimately occurs through the accumulation of discharge products and irreversible clogging of the porous electrode during the cycling. Electrode binder degradation in the presence of reduced…
When an ionic liquid adsorbs onto a porous electrode, its ionic arrangement is deeply modified due to a screening of the Coulombic interactions by the metallic surface and by the confinement imposed upon it by the electrode's morphology. In…
Advances in lithium-metal anodes have inspired interest in discovery of Li-free cathodes, most of which are natively found in their charged state. This is in contrast to today's commercial lithium-ion battery cathodes, which are more stable…
The degradation mechanism in a sodium cell of a layered Na0.48Al0.03Co0.18Ni0.18Mn0.47O2 (NCAM) cathode with P3/P2 structure is investigated by revealing the changes in microstructure and composition upon cycling. The work aims to…
Solid-ion conductors (SICs) comprising non-ionic plastic crystals and lithium salts often require compositing with polymers to render them processable for use in solid-state lithium-metal batteries. Here, we show that polymer-doped plastic…
Temperature is known to impact Li-ion battery performance and safety, however, understanding its effect on Li-ion batteries has largely been limited to uniform high or low temperatures. While the insights gathered from such research are…
Composite materials achieved by including transition-metal oxides with different structures and morphologies in sulfur are suggested as scalable cathodes for high-energy lithium-sulfur (Li-S) batteries. The composites contain 80 wt.% sulfur…
The spinel Li4Ti5O12 (LTO) has emerged as a promising anode material for the next generation of all-solid-state Li-ion batteries (ASSB), primarily due to its characteristic "zero strain" charge/discharge behavior and exceptional cycling…
Absolute cross sections are measured for charge-exchange, ionization, and excitation within the same experimental setup for the Li$^{+}-$Ar, K$^{+}-$ Ar, and Na$^{+}-$ He collisions in the ion energy range $0.5-10$ keV. Results of our…
Spinel-type LiNi0.5Mn1.5O4 (LNMO) is one of the most promising 5 V-class cathode materials for Li-ion batteries that can achieve high energy density and low production costs. However, in liquid electrolyte cells, the high voltage causes…
Photo-rechargeable (solar) battery can be considered as an energy harvesting cum storage system, where it can charge the conventional metal-ion battery using light instead of electricity, without having other parasitic reactions. Here we…
Use of lithium as a surface coating in fusion devices improves plasma performance, but the change in wall properties affects the secondary electron emission properties of the material. Lithium oxidizes easily, which drives the emission…
Silicon-based ion trap chips can benefit from existing advanced fabrication technologies, such as multi-metal layer techniques for two-dimensional architectures and silicon photonics for the integration of on-chip optical components.…
The use of Si anodes can greatly improve the energy density of Li-ion batteries. However, understanding and mitigation of calendar aging remains a barrier to commercialization. In this short report, we utilize operando Nuclear Magnetic…