Related papers: Mechanisms of Elevated Temperature Galling in Hard…
Graphene is a truly two-dimensional atomic crystal with exceptional electronic and mechanical properties. Whereas conventional bulk and thin-film materials have been studied extensively, the key mechanical properties of graphene, such as…
Interfaces have long been known to be the key to many mechanical and electric properties. To nickel base superalloys which have perfect creep and fatigue properties and have been widely used as materials of turbine blades, interfaces…
Atomically thin oxides are increasingly recognized as an emerging class of 2D materials, yet their multifunctional properties have been far less investigated compared to other layered materials. Among these, gallium oxide is distinguished…
Shear bands originating from in situ tensile tests of Al$_{88}$Y$_{7}$Fe$_{5}$ melt-spun ribbons conducted in a transmission electron microscope are compared with ones which had formed ex situ during cold rolling. During in situ straining,…
High-manganese twinning-induced plasticity (TWIP) steels exhibit high strain hardening, high tensile strength, and high ductility, which make them attractive for structural applications. At low tensile strain rates, TWIP steels are prone to…
Twinning induced plasticity (TWIP) steels are high strength metallic materials with potential for structural components in e.g. automotive applications. However, they are prone to hydrogen embrittlement (HE) and galvanic corrosion. We…
Room and high temperature mechanical properties of reactive magnetron sputtered TaSiN coatings were measured using nanoindentation (between 25C and 500C). Fracture toughness was also evaluated at a similar temperature range using the…
Coherent misfitting precipitates in elastically stressed media such as $\gamma \prime$ particles in nickel-based super-alloys show various splitting patterns such as doublets, quartets, or octets due to their misfit strain energy. While it…
The physics of sliding nanofriction at high temperature near the substrate melting point $\Tmelt$ is so far unexplored. We conducted simulations of hard tips sliding on a prototype non-melting surface, NaCl(100), revealing in this regime…
Adhesive interactions between elastic structures such as graphene sheets, carbon nanotubes, and microtubules have been shown to exhibit hysteresis due to irrecoverable energy loss associated with bond breakage, even in static…
The influence of the physical mechanisms activated during deformation and annealing on the microstructure and texture evolution as well as on the mechanical properties in the equiatomic CoCrFeMnNi high-entropy alloy (HEA) were investigated.…
A comprehensive study of pulsed nitriding in AISI H13 tool steel at low temperature (400{\deg}C) is reported for several durations. X-ray diffraction results reveal that a nitrogen enriched compound (Epsilon-Fe2-3N, iron nitride) builds up…
Single-layer FeSe films grown on (001) SrTiO3 substrates have shown a significant increase in superconducting transition temperature compared to bulk FeSe. Several mechanisms have been proposed to explain such enhancement, including…
Experimental diffraction patterns produced by grazing scattering of fast helium atoms from a Ag(110) surface are used as a sensitive tool to test both the scattering and the potential models. To describe the elastic collision process we…
Quasi-two-dimensional transition-metal dichalcogenides are a key platform for exploring emergent nanoscale phenomena arising from complex interactions. Access to the underlying degrees-of-freedom on their natural time scales motivates the…
Identifying the microscopic processes that limit conductivity is essential for understanding correlated and quantum-critical states in quantum materials. In twisted bilayer graphene (TBG) and other twist-controlled materials, the…
Micromovements that occur in the joint between dental prostheses and implants can lead to wear-induced degradation. This process can be enhanced by corrosion in the oral environment influenced by the presence of solutions containing…
Grain Boundary (GB) deformation mechanisms such as Sliding (GBS) and Opening (GBO) are prevalent in alloys at high homologous temperatures but are hard to capture quantitatively. We propose an automated procedure to quantify 3D GB…
We report on gate hysteresis in resistance on high quality graphene/h-BN devices. We observe a thermal activated hysteretic behavior in resistance as a function of the applied gate voltage at temperatures above 375K. In order to investigate…
The transition between necking-mediated tensile failure of glasses, at elevated temperatures and/or low strain-rates, and shear-banding-mediated tensile failure, at low temperatures and/or high strain-rates, is investigated using tensile…