Related papers: Mechanisms of Elevated Temperature Galling in Hard…
The behaviors of resistance, magnetoresistance (up to 5 T), and Hall electromotive force (EMF) with varying temperature (from 10 to 300 K) and measuring current (from 10 mkA to 10 mA) are studied for the Si sample with CrSi2…
We propose a direct experimental extraction technique for trapped charges and quantitative energy band diagrams in the FeFETs with metal-insulator-ferroelectric-insulator-semiconductor (MIFIS) structure, derived from the physical…
The nanofriction of Xe monolayers deposited on graphene was explored with a quartz crystal microbalance (QCM) at temperatures between 25 and 50 K. Graphene was grown by chemical vapor deposition and transferred to the QCM electrodes with a…
Large single crystals of natural zircon were shock-loaded at 13.6 and 51.3 GPa in planar geometry. No structural changes were observed after loading at 13.6 GPa. Loading to 51.3 GPa resulted in zircon transformation to a denser…
Austenite reversion during tempering of a Fe-13.6Cr-0.44C (wt.%) martensite results in an ultrahigh strength ferritic stainless steel with excellent ductility. The austenite reversion mechanism is coupled to the kinetic freezing of carbon…
A computational framework integrating thermodynamics, kinetics, and mechanical stress calculations is developed to study supercritical CO2 induced corrosion in model Fe-based MA956 and Ni-based H214 alloys. Empirical models parametrized…
The mechanism of the evolution of the deformed microstructure at the earliest stage of annealing where the existence of the lowest length scale substructure paves the way to the formation of the so-called subgrains, has been studied for the…
Atomic diffusion at nanometer length scale may differ significantly from bulk diffusion, and may sometimes even exhibit counterintuitive behavior. In the present work, taking Cu/Ni as a model system, a general phenomenon is reported which…
Despite the blooming interest, the transition-metal rare-earth ferrimagnets have not been comprehensively understood in terms of their coercivity and transport properties. Here, we report a systematic study of the magnetic and transport…
We report experimental results indicating possible high-temperature superconductivity in graphite intercalation compounds synthesized with lithium-based alloys. Temperature-dependent measurements of magnetization, trapped magnetic flux, and…
Two-dimensional materials with ferroelectric properties break the size effect of conventional ferroelectric materials and unlock unprecedented potentials of ferroelectric-related application at small length scales. In this work, using…
Diffusion mediated interaction in metal-substrate assembly during high temperature annealing leads to possible formation of new composite materials. Here, sputtered grown Ti films on Si3N4/Si substrate has been reported to produce titanium…
We have performed thermal expansion and compressibility measurements on the recently discovered superconducting material NaxCoO2*4xD2O (x=1/3) using neutron powder diffraction over the temperature range 10-295 K and the pressure range 0-0.6…
Wear is well known for causing material loss in a sliding interface. Available macroscopic approaches are bound to empirical fitting parameters, which range several orders of magnitude. Major advances in tribology have recently been…
Segregation by thermal diffusion of an intruder immersed in a sheared granular gas is analyzed from the (inelastic) Boltzmann equation. Segregation is induced by the presence of a temperature gradient orthogonal to the shear flow plane and…
Although there are enormous numbers of high-temperature thermoelectric materials present, designing a near-room-temperature especially n-type thermoelectric material with high zT is extremely challenging. Generally, pristine Ag2Se exhibits…
We investigated thermal properties of the epoxy-based composites with a high loading fraction - up to f=45 vol.% - of the randomly oriented electrically conductive graphene fillers and electrically insulating boron nitride fillers. It was…
Precipitation-strengthened alloys, such as Ni-base, Co-base and Fe-base superalloys, show the development of dendrite-like precipitates in the solid state during aging at near-$\gamma^{\prime}$ solvus temperatures. These features arise out…
Normal incidence 1 keV Ar$^+$ ion bombardment leads to amorphization and ultrasmoothing of Ge at room temperature, but at elevated temperatures the Ge surface remains crystalline and is unstable to the formation of self-organized nanoscale…
It has been widely accepted that the introduction of titanium carbides into titanium-based alloys can significantly enhance the oxidation resistance due to their superior physicochemical stability at elevated temperatures. The present study…