Related papers: Performance of FPGA controller in ISAC-1 accelerat…

The KEK 8-GeV electron / 3.5-GeV positron linac has been operated with very different beam specifications for downstream rings, KEKB, PF and PF-AR. For the reliable operation among these beam modes intelligent beam switching and beam…

This letter proposes a new design of frequency-locked loop (FLL) which is based on synchronous (dq) reference frame instead of stationary ({\alpha}\b{eta}) reference frame. First, a synchronous reference frame FLL (briefly called SRF-FLL0)…

To eliminate the static error, overshoot, and vibration of the series elastic actuator (SEA) position control, the resonance ratio control (RRC) algorithm is improved based on L1 adaptive control(L1AC)method. Based on the analysis of the…

We present the first experimental confirmation of the so-called "self-phaselocked delay interferometry". This laser frequency stabilization technique consists basically in comparing the prompt laser signal with a delayed version of itself…

The objective of this paper is to design and implement an intelligent Traffic Light Controller system for a four way road intersection. The design is carried out using Verilog, and the hardware is implemented on a FPGA. The chosen…

The functions of the Low-Level Radio Frequency (LLRF) system at European Spallation Source (ESS) are implemented on different Field-Programmable Gate Array (FPGA) boards in a Micro Telecommunications Computing Architecture (MTCA) crate.…

At the end of the Large Hadron Collider's Run 2, CERN's Proton Injector Linac 2, commissioned in 1978, delivered its final beam in December 2018. For Run 3, from March 2021, a new H$^{-}$ will take over the role: Linac4. The machine has…

FPGA overlays are commonly implemented as coarse-grained reconfigurable architectures with a goal to improve designers' productivity through balancing flexibility and ease of configuration of the underlying fabric. To truly facilitate full…

Hardware acceleration has emerged as a key research topic for supporting computationally intensive signal processing and artificial intelligence applications in 6G research and development studies. This paper presents an RF Network on Chip…

For the PIP-II Injector Test (PI-Test) at Fermilab, a four-vane radio frequency quadrupole (RFQ) is designed to accelerate a 30-keV, 1-mA to 10-mA, H- beam to 2.1 MeV under both pulsed and continuous wave (CW) RF operation. The available…

As more inverter-connected renewable resources are integrated into the grid, frequency stability may degrade because of the reduction in mechanical inertia and damping. A common approach to mitigate this degradation in performance is to use…

Any cavity controller for a distributed system needs a Phase Reference Line (PRL) signal from which to define phases of a cavity field measurement. The LCLS-II PRL system at SLAC provides bidirectional (forward and reverse) phase references…

FLASH and the European XFEL are SASE-FEL user facilities, at which superconducting TESLA cavities are operated in a pulsed mode to accelerate long bunch-trains. Several cavities are powered by one klystron. While the low-level rf system is…

This research examines the stability of crossed-field amplifiers (CFAs) and characterizes their different modes of operation: amplification, driven oscillation, and self-excited oscillation. The CFA used in this paper is the Recirculating…

The design of the proposed linear collider TESLA is based on 9-cell 1.3 GHz superconducting niobium cavities, operated in pulsed mode. Within the framework of an international collaboration the TESLA Test Facility (TTF) has been set up at…

The construction of the initial part of a normally conducting linac for hydrogen ion beams with a pulsed current of ~20 mA up to an energy of ~70 MeV is considered. The RFQ at a frequency of ~160 MHz accelerates ions to an energy of ~4 MeV.…

Many modern and future particle accelerators employ high gradient superconducting RF (SRF) to generate beams of high energy, high intensity and high brightness for research in high energy and nuclear physics, basic energy sciences, etc. In…

Cooperative integrated sensing and communication (ISAC) based on orthogonal frequency-division multiplexing (OFDM) enables network-wide sensing by exploiting the spatial diversity of multi-base-station (BS). This paper studies performance…

In this paper, we propose an architecture for FPGA emulation of mixed-signal systems that achieves high accuracy at a high throughput. We represent the analog output of a block as a superposition of step responses to changes in its analog…

A 52MHz Radio Frequency Quadrupole (RFQ) linear accelerator (linac) is designed to serve as an initial structure for the SSC-linac system (injector into Separated Sector Cyclotron). The designed injection and output energy are 3.5 keV/u and…