Related papers: Performance of FPGA controller in ISAC-1 accelerat…

The PEP-II B Factory Low-Level RF System (LLRF) is a fully programmable VXI based design running under an EPICS control environment. Several RF feedback loops are used to control longitudinal coupled-bunch modes driven by the accelerating…

High precision Low-level RF (LLRF) control and monitoring systems for future particle accelerators will be a significant technical challenge as the requirements in performance, flexibility and affordability become increasingly stringent. We…

This document describes a new package to compute high performance simulations of a module of superconducting accelerating cavities from the LLRF controller perspective. The reason to make a dedicated C++/Python package is to simulate all…

We describe a many-channel experiment control system based on a field-programmable gate array (FPGA). The system has 16 bit resolution on 10 analog 100 MS/s input channels, 14 analog 100 MS/s output channels, 16 slow analog input and output…

Superconducting Radio Frequency (SRF) cavities are used in modern accelerators to efficiently accelerate particles. When cavity is supplied with pulsed RF field it undergoes a mechanical strain due to the Lorentz force. The resulting…

This contribution focuses on phase-noise added during frequency conversion in low-level radio frequency (LLRF) control systems. The stability of beams' parameters in linear accelerators depends on the stability of amplitude and phase of the…

Functional verification is a critical bottleneck in integrated circuit development, with CPU verification being especially time-intensive and labour-consuming. Industrial practice relies on differential testing for CPU verification, yet…

This thesis presents fuzzy-L1 adaptive controller and Model Reference Adaptive Control (MRAC) with Prescribed Performance Function (PPF) as two adaptive approaches for high nonlinear systems as two original contribution to the literature.…

The phase averaging reference line system provides the RF phase reference, LO and clock signals to the LLRF and other accelerator sub-systems. The PIP-II linac has RF systems at three frequencies - 162.5 MHz, 325 MHz and 650 MHz. A…

As the demands for electric vehicles, electric aircrafts, unmanned aircraft systems, and other motor-driven systems increase, high-performance motor drives employing variable frequency control with higher efficiency and reliability are…

Applications of Trigger Units (TU) can be found in almost all accelerators at CERN. The requirements in terms of operating frequencies, configuration or modes of operation change from one application to another, how-ever, in terms of design…

A near memory hardware accelerator, based on a novel direct path computational model, for real-time emulation of radio frequency systems is demonstrated. Our evaluation of hardware performance uses both application-specific integrated…

The commissioning of two cryomodule components is underway at Fermilab's Superconducting Radio Frequency (SRF) Accelerator Test Facility. The research at this facility supports the next generation high intensity linear accelerators such as…

PIP-II is an 800 MEV superconducting linac that is in the initial acceleration chain for the Fermilab accelerator complex. The RF system consists of a warm front-end with an ion source, RFQ and buncher cavities along with 25 superconducting…

In FEL (Free-Electron Laser) accelerators, LLRF (Low-Level Radiofrequency) systems usually deploy feedback or feedforward algorithms requiring precise microwave measurement. The slow drift of the clock allocation network of LLRF…

The increasing penetration of converter-based renewable generation has resulted in faster frequency dynamics, and low and variable inertia. As a result, there is a need for frequency control methods that are able to stabilize a disturbance…

Superconducting Radio-Frequency (SRF) cavities operating in continuous wave (CW) mode and with low beam loading are devices characterized by a high loaded quality factor, in the order of 10^7, and narrow bandwidth, in the order of 10 Hz.…

This paper presents a novel framework for enhancing the security, data rate, and sensing performance of integrated sensing and communications (ISAC) systems. We employ a random frequency and pulse repetition interval (PRI) agility (RFPA)…

The LCLS-II HE superconducting linac can produce multi-energy beams by supporting multiple undulator lines simultaneously. This could be achieved by using the cavity SRF tuner in the off-frequency detune mode. This off-frequency operation…

This paper presents a novel load frequency control (LFC) design using integral-based decentralize fixed-order perturbed dynamic output tracking scheme in a delay dependent nonlinear interconnected multi-area power system via LMI approach.…