Related papers: Resistless EUV lithography: photon-induced oxide p…
Mid-infrared spectroscopy enables biochemical sensing by identifying vibrational molecular fingerprints, but it faces limitations in instrumentation portability and analytical sensitivity. Optical metasurfaces with strong mid-IR photonic…
Graphene, being an ultrathin, durable, flexible, transparent material with superior conductivity and unusual optical properties, promises many novel applications in electronics, photonics and optoelectronics. For applications in…
Electron backscatter diffraction (EBSD) is a well-established method of characterisation for crystalline materials. This technique can rapidly acquire and index diffraction patterns to provide phase and orientation information about the…
Metasurfaces enable precise control over the properties of light and hold promise for commercial applications. However, fabricating visible metasurfaces suitable for high-volume production is challenging and requires scalable processes.…
The ability to precisely control the electronic coupling/decoupling of adsorbates from surfaces is an essential goal. It isimportant for fundamental studies not only in surface science but alsoin several applied domains including, for…
Plasmonic color printing with semicontinuous metal films is a lithography-free, non-fading, and environment-friendly method of generation of bright colors. Such films are comprised of metal nanoparticles, which resonate at different…
We report on the development of coatings for a CCD detector optimized for use in a fixed dispersion UV spectrograph. Due to the rapidly changing index of refraction of Si, single layer broadband anti-reflection coatings are not suitable to…
Structured light has gained significant attention in recent years, especially in the generation and application of vector beams. These beams, characterized by a spatially varying polarization state, are a powerful tool to enhance our…
Porous silicon layers (PS) have been prepared in this work via Photoelectrochemical etching process (PEC) of n type silicon wafer of 0.8 ohm.cm resistivity in hydrofluoric (HF) acid of 24.5 precent concentration at different etching times…
In this paper, we simulate a front surface inverted pyramidal grating texture on 2 to 400 micron thick silicon and optimize it to derive maximum photocurrent density from the cell. We identify a one size fits all front grating period of…
A high-performance fast response deep ultraviolet (UV) photodetectors with interdigitated Ti/Au planar electrodes using a lithography technology has fabricated on homoepitaxial diamond. The device shows a high ultraviolet photocurrent at…
We present a comprehensive characterization of laser-produced tin (Sn) plasmas relevant to extreme ultraviolet (EUV) lithography using a multi-diagnostic suite integrated into the new experimental platform, "SparkLight". Tin plasmas are…
High-quality thin films of the ferromagnetic-insulator europium(II) sulfide (EuS) were fabricated by pulsed laser deposition on Al2O3 (0001) and Si (100) substrates. A single orientation was obtained with the [100] planes parallel to the…
Antimony trisulfide ($Sb_{2}S_{3}$), as an emerging material for integrated photonic devices, has attracted significant attention due to its high index, low loss, and phase-changing property in the optical regime. However, conventional…
Deep-UV ~ 250 nm (4.96 eV) tilted in-situ co-illumination of the sample under imaging by scanning electron microscope (SEM) is developed at a robust and practical instrument level. Precise mechanical control of the lateral position and tilt…
The enhancement of Er$^{3+}$-based up-conversion for photovoltaics in multilayer porous silicon photonic structures is considered theoretically and experimentally. Transfer matrix simulations are used to assess the increased photonic…
Metallic layers are known to be used for the suppression of wave transmission when their thickness is sufficiently higher than the skin depth of metal. If in addition to blocking the transmission, metallic layers have the feature of…
Highly flexible electromagnetic interference (EMI) shielding material with excellent shielding performance is of great significance to practical applications in next-generation flexible devices. However, most EMI materials suffer from…
Quantum lithography achieves phase super-resolution using fragile, experimentally challenging entangled states of light. We propose a scalable scheme for creating features narrower than classically achievable, with reduced use of quantum…
High resolution image sensors require electrical access to each individual pixel for signal readout. Such access is especially challenging for ultra-miniaturized pixels, for heterogeneously integrated sensing and readout layers in…