Related papers: Epitaxial lattice-matched Al$_{0.89}$Sc$_{0.11}$N/…
Distributed Bragg reflectors (DBRs) composed of an AlN/AlGaN superlattice were grown of Si (111) substrates. The first high-reflectance III-nitride DBR on Si was achieved by growing the DBR directly on the Si substrate to enhance the…
AlScN is a new wide bandgap, high-k, ferroelectric material for RF, memory, and power applications. Successful integration of high quality AlScN with GaN in epitaxial layer stacks depends strongly on the ability to control lattice…
We report on the realization of a high quality distributed Bragg reflector with both high and low refractive index layers lattice matched to ZnTe. Our structure is grown by molecular beam epitaxy and is based on binary compounds only. The…
We report epitaxial growth of a-plane (11-20) AlInN layers nearly-lattice-matched to GaN. Unlike for c-plane oriented epilayers, a-plane Al_{1-x}In_{x}N cannot be simultaneously lattice-matched to GaN in both in-plane directions. We study…
High quality 940 nm Al$_x$Ga$_{1-x}$As n-type distributed Bragg reflectors (DBRs) were successfully monolithically grown on off-cut Ge (100) substrates. The Ge-DBRs have reflectivity spectra comparable to those grown on conventional bulk…
Distributed Bragg reflectors (DBRs) composed of an AlN/GaN superlattice were demonstrated for the first time on Si (100) substrates. Single-crystal wurtzite superlattice structures were achieved on this cubic substrate by employing offcut…
An accurate knowledge of the lattice parameters of the new nitride Sc$_\textit{x}$Al$_\textit{1-x}$N is essential for understanding the elastic and piezoelectric properties of this compound as well as for the ability to engineer its strain…
Distributed Bragg reflectors (DBRs) are one of the basic photonic structures used to define microcavities for fundamental light-matter coupling studies, as well as to optimize performance of optoelectronic and photonic devices, e.g., lasers…
Thanks to its high refractive index contrast, band gap and polarization mismatch compared to GaN, In0.17Al0.83N layers lattice-matched to GaN are an attractive solution for applications such as distributed Bragg reflectors, ultraviolet…
High-reflectance group III-nitride distributed Bragg reflectors (DBRs) were deposited by MOCVD on Si (111) substrates. A reflectance greater than 96% was demonstrated for the first time for an AlN/GaN DBR with a stop-band centered in the…
High quality AlxGa1-xAs distributed Bragg reflectors (DBRs) were successfully monolithically grown on on-axis Si (100) substrates via a Ge layer formed by aspect ratio trapping (ART) technique. The GaAs/ART-Ge/Si-based DBRs have…
Cubic GaN layers were grown by plasma-assisted molecular beam epitaxy on 3C-SiC (001)substrates. In situ reflection high energy electron diffraction was used to quantitatively determine the Ga coverage of the GaN surface during growth.…
Ternary and quaternary cubic c-AlxIn1-xN/GaN and c-AlxGayIn1-x-y/GaN heterostructures lattice-matched to c-GaN on freestanding 3C-SiC substrates were grown by plasma-assisted molecular beam epitaxy. The c-AlxGayIn1-x-y alloy permits the…
Fabrication of porous GaN distributed Bragg reflectors (DBRs) via the selective electrochemical etching (ECE) of conductive Si-doped layers, separated by non-intentionally doped (NID) layers, provides a straightforward methodology for…
ScxAl1-xN is an emerging III-nitride material known for its high piezoelectric coefficient and ferroelectric properties. Integration of wide-bandgap ScxAl1-xN with GaN is particularly attractive for quantum photonic devices. Achieving low…
We present the realization and characterization of a 20 fold, fully lattice-matched epitaxial distributed Bragg reflector based on (Cd,Zn)Te and (Cd,Zn,Mg)Te layers. We also present a microcavity based on (Cd,Zn,Mg)Te containing a (Cd,Zn)Te…
The optical properties of BAlN and BGaN ternary alloys are investigated using first-principle calculation. Hybrid density functional theory is applied to determine the refractive indices of different alloys. A peculiar non-linear behavior…
We report the fabrication of monolithically integrated 940 nm AlGaAs distributed Bragg reflectors (DBRs) on graded GaAsP/Si substrates. Low-density surface bumps and cross-hatch patterns were observed on the DBR surfaces. Cross-sectional…
We present an approach to the molecular-beam epitaxy of high-Q planar GaAs-based microcavities in which the AlGaAs high-index layers of the distributed Bragg reflectors (DBRs) are replaced by short-period GaAs/AlAs superlattices (digital…
Using comprehensive x-ray reciprocal space mapping, we establish the precise lattice-matching composition for wurtzite $Sc_xAl_{1-x}N$ layers on (0001) GaN to be x = 0.14+/-0.01. 100-nm thick $Sc_xAl_{1-x}N$ films (x = 0.09 - 0.19) were…