Related papers: Voltage deficit in solar cells with suppressed rec…
The presence of interface recombination in a complex multilayered thin-film solar structure causes a disparity between the internal open-circuit voltage (VOC,in), measured by photoluminescence, and the external open-circuit voltage (VOC,ex)…
All-perovskite tandem solar cells with narrow and wide bandgap perovskite absorbers are promising candidates for low-cost and high efficiency photovoltaic applications. However, the open circuit voltage of typical tandem structures is…
There is evidence that interface recombination in Cu2ZnSnS4 solar cells contributes to the open-circuit voltage deficit. Our hybrid density functional theory calculations suggest that electron-hole recombination at the Cu2ZnSnS4/CdS…
Metastable defects can decisively influence the diode factor and thus the efficiency of a solar cell. The diode factor is also influenced by the doping level and the recombination mechanisms in the solar cell. Here we quantify how the…
Recombination losses contribute to reduce $J_{SC}$, $V_{OC}$ and the fill factor of organic solar cells. Recent advances in non-fullerene organic photovoltaics have shown, nonetheless, that efficient charge generation can occur under small…
The InAs/InGaAs DWELL solar cell grown by MBE is a standard pin diode structure with six layers of InAs QDs embedded in InGaAs quantum wells placed within a 200-nm intrinsic GaAs region. The GaAs control wafer consists of the same pin…
Surface recombination has a major impact on the open-circuit voltage ($V_\text{oc}$) of organic photovoltaics. Here, we study how this loss mechanism is influenced by imbalanced charge transport in the photoactive layer. As a model system,…
Intermediate Band Solar Cell is an advanced concept for solar energy conversion in which two low-energy photons can promote an electron to the conduction band through a so-called intermediate band. To limit recombination and preserve the…
Recombination of photogenerated charge carriers in polymer bulk heterojunction (BHJ) solar cells reduces the short circuit current (Jsc) and the fill factor (FF). Identifying the mechanism of recombination is, therefore, fundamentally…
We present first principles calculations of the electronic properties of trigonal selenium with emphasis on photovoltaic applications. The band gap and optical absorption spectrum of pristine selenium is calculated from many-body…
Fundamental electronic processes such as charge-carrier transport and recombination play a critical role in determining the efficiency of hybrid perovskite solar cells. The presence of mobile ions complicates the development of a clear…
We report a charge based model to establish the analytical equation, describing the nature of capacitance-voltage ($C$-$V$) characteristics of organic solar cells under dark condition (or organic diodes) over a wide range of voltage,…
Among the parameters determining the efficiency of an organic solar cell, the open-circuit voltage ($V_\text{OC}$) is the one with most room for improvement. Existing models for the description of $V_\text{OC}$ assume that photogenerated…
We present evidence that band gap narrowing at the heterointerface may be a major cause of the large open circuit voltage deficit of Cu$_2$ZnSnS$_4$/CdS solar cells. Band gap narrowing is caused by surface states that extend the…
The steady-state distribution of carrier concentrations in a solar cell under operating conditions is a key source of carrier recombination and directly influences the output current density. In this study, we investigated the effects of…
In a recent paper, Street et al. [Phys. Rev. B 81, 205307 (2010)] propose first order recombination due to interface states to be the dominant loss mechanism in organic bulk heterojunction solar cells, based on steady-state current--voltage…
The enhancement of the fill factor in the current generation of perovskite solar cells is the key for further efficiency improvement. Thus, methods to quantify the fill factor losses are urgently needed. A classical method to quantify Ohmic…
The fill factor (FF) is a critical parameter for solar cell efficiency, but its analytical description is challenging due to the interplay between recombination and charge extraction processes. An often overlooked yet significant factor…
Analytic expressions are presented for the dark current-voltage relation $J(V)$ of a $pn^+$ junction with positively charged columnar grain boundaries with high defect density. These expressions apply to non-depleted grains with…
The case of a non-biased (light excited) p-n photo-voltaic (PV) cell working in a closed circuit with a resistive load is investigated by means of irreversible thermodynamics in the linear range. To our knowledge, this is the first time…