Related papers: Laser Etch Enabled Active Embedded Microfluidic Co…
Arrays of H-shape microfluidic channels connecting two different fluidic reservoirs have been built with silicon/SU8 microfabrication technologies utilized in production of thermal inkjet printheads. The fluids are delivered to the channels…
The integration of a PDMS membrane within orthogonally placed PMMA microfluidic channels enables the pneumatic actuation of valves within bonded PMMA-PDMS-PMMA multilayer devices. Here, surface functionalization of PMMA substrates via acid…
We report the isotropic plasma atomic layer etching (ALE) of aluminum nitride using sequential exposures of SF$_6$ plasma and trimethylaluminum (Al(CH$_3$)$_3$, TMA). ALE was observed at temperatures greater than 200 $^\circ$C, with a…
Resistively guiding laser-generated fast electron beams in targets consisting of a resistive wire embedded in lower $Z$ material should allow one to rapidly heat the wire to over 100eV over a substantial distance without strongly heating…
Beta-Ga2O3 is an ultra-wide bandgap semiconductor with emerging applications in power electronics. The introduction of acceptor dopants yields semi-insulating substrates necessary for thin-film devices. In the present work, exposure of…
Ground-state cooling of mechanical motion by coupling to a driven optical cavity has been demonstrated in various optomechanical systems. In our work, we provide a so far missing thermodynamic performance analysis of optomechanical sideband…
This letter reports high performance beta-(AlxGa1-x)2O3/Ga2O3 Heterostructure FET (HFET) with improved regrowth process. Highly scaled I shaped gate have been fabricated with degenerately doped (N++) source/drain contact regrown by ozone…
A novel method of ground state laser cooling of trapped atoms utilizes the absorption profile of a three (or multi-) level system which is tailored by a quantum interference. With cooling rates comparable to conventional sideband cooling,…
We report the first observation of superfluid $\beta$ phase of $^3$He. This phase is realized in $^3$He in nematic aerogel in presence of high magnetic field right below the superfluid transition temperature. We use a vibrating aerogel…
The electrohydrodynamic (EHD) force produced by ions ejected from a corona plasma is a solid state, silent mechanism for accelerating air, useful for applications ranging from electronics cooling to flying microrobots. This paper presents…
Microchannels have increasingly been used to miniaturize heat transfer equipment, improve energy efficiency, and minimize heat transfer fluid inventory. A fundamental understanding of condensation in microscale will yield far-reaching…
O2-plamsa-based digital etching of Al0.25Ga0.75N with a 0.8 nm AlN spacer on GaN was investigated. At 40 W RF bias power and 40 sccm oxygen flow, the etch depth of Al0.25Ga0.75N was 5.7 nm per cycle. The 0.8 nm AlN spacer layer acted as an…
The observed cooling rate of hot gas in clusters is much lower than that inferred from the gas density profiles. This suggests that the gas is being heated by some source. We use an adaptive-mesh refinement code (FLASH) to simulate the…
The French collaborative Trio4CLF project aims to understand and control the cryogenic cooling of amplifiers for high power (~1 PetaWatt) and high repetition rate (1-10 Hertz) lasers. In such amplifiers, the fluid (low temperature gaseous…
The correlated electron system SmNiO3 exhibits a metal-insulator phase transition at 130 {\deg}C. Using an ionic liquid as an electric double layer (EDL) gate on three-terminal ultrathin SmNiO3 devices, we investigate gate control of the…
In this letter we report on the generation of cold electron beams using a Cs3Sb photocathode grown by co-deposition of Sb and Cs. By cooling the photocathode to 90 K we demonstrate a significant reduction in the mean transverse energy…
We demonstrate the first microchip semiconductor membrane external-cavity surface-emitting laser. This compact type of laser consists solely of a semiconductor gain region present as a micron-thin membrane, sandwiched between two…
Due to its tunable band gap, anisotropic behavior, and superior thermoelectric properties, device applications using layered tellurene (Te) are becoming attractive. Here, we report a thinning technique for exfoliated tellurene nanosheets…
The quality factor (Q), mode volume (Veff), and room-temperature lasing threshold of microdisk cavities with embedded quantum dots (QDs) are investigated. Finite element method simulations of standing wave modes within the microdisk reveal…
The demonstration of a quantum link between microwave and optical frequencies would be an important step towards the realization of a quantum network of superconducting processors. A major impediment to quantum electro-optic transduction in…