Related papers: Numerical modeling of CuSbSe2-based dual-heterojun…
Lead-free all-inorganic halide perovskite solar cells (PSCs) have emerged as a promising alternative to toxic lead-based solar cells and organic solar cells, which have limited stability. This work explores such a PSC with sodium tin…
Thin films are preferred for high photocurrent conversion efficiency, but strong photon absorption at photon energies below the bandgap (near and shortwave infrared) typically requires thicker semiconductor layers. To address this tradeoff,…
CdTe is the most commercially successful thin-film photovoltaic technology to date. The recent development of Se-alloyed CdSe$_{x}$Te$_{1-x}$ layers in CdTe solar cells has led to higher device efficiencies, due to a lowered bandgap…
A high theoretical efficiency of 47.2% was achieved by a novel combination of In0.51Ga0.49P, GaAs, In0.24Ga0.76As and In0.19Ga0.81Sb subcell layers in a simulated quadruple junction solar cell under 1 sun concentration. The electronic…
Sulphurization processes in Cu(In,Ga)Se$_2$ thin-film solar cells has been intensively studied in the last decade as a viable alternative to the existing Ga-grading. The main advantage of using S grading is that by substituting Se with S we…
This paper reports on the investigation of the electronic properties of a thin film CdS/CdTe solar cell with the Ion Beam Induced Charge (IBIC) technique. The device under test is a thin film (total thickness around 10 um) multilayer…
Thin-film photovoltaics offers a path to significantly decarbonize our energy production. Unfortunately, current materials commercialized or under development as thin-film solar cell absorbers are far from optimal as they show either low…
In this paper we carried out theoretical study of the general issues related to the efficiency of SiC:H/a-Si:H single- and multi-junction tandem solar cells. Implementation of numerical simulations by the use of AMPS-1D program of…
A tandem GaAsP/SiGe solar cell has been developed employing group-IV reverse buffer layers grown on silicon substrates with a subsurface porous layer. Reverse buffer layers facilitate a reduction in the threading dislocation density with…
Lead poisoning and notorious ambient instability in lead-based halide perovskites pave the way for the exploration of alternative materials for affordable and efficient solar cell fabrication. An important prerequisite to this end is the…
Surface recombination affects both light-to-electricity and electricity-to-light conversion in solar cells (SCs). Therefore, quantitative analysis and reduction of surface recombination is an important direction in SC research. In this…
With the rapid advancement of photovoltaic science, there has been an increasing focus on the development of environment-friendly and structurally advanced perovskite solar cells (PSCs). In this context, this study investigates an…
The photovoltaic properties of carbon nanotube/Si heterojunction solar cells were investigated using network films of high quality single-walled carbon nanotubes (SWNTs) grown by atmospheric-pressure floating-catalyst chemical vapor…
Atomically thin layered materials such as graphene and transition-metal dichalcogenides exhibit great potential as active materials in optoelectronic devices because of their high carrier-transporting properties and strong light-matter…
In this study, we designed and optimized the performance of pin junction GaAs/AlGaAs heterojunction nanowire solar cell arrays. It is done by performing coupled optoelectronic simulations to find the optimal doping for the GaAs core and…
A high photon to electricity conversion efficiency of 47.2082% was achieved by a novel combination of In0.51Ga0.49P, GaAs, In0.24Ga0.76As and In0.19Ga0.81Sb subcell layers in a quadruple junction solar cell design. The electronic bandgap of…
This work presents a first-principles study of the optoelectronic properties of vertically-stacked bilayer heterostructures composed of 2D transition-metal dichalcogenides (TMDs). The calculations are performed using the density-functional…
Transition metal dichalcogenides (TMDCs) have garnered significant interest in optoelectronics, owing to their scalability and thickness-dependent electrical and optical properties. In particular, thin films of TMDCs could be used in…
The theoretical analysis of photovoltaic conversion efficiency of highly effective silicon solar cells (SC) is performed for n-type and p-type bases. The case is considered when the Shockley-Read-Hall recombination in the silicon bulk is…
Hybrid Lead halide perovskites, despite having unique intrinsic properties with the possibility of flexible synthesis and device fabrication, still suffer from two fundamental issues, i.e. stability in external environment and toxicity due…