Related papers: Numerical simulation of flow over flapping wings i…
The wake topology developing behind a wall-mounted square cylinder in a turbulent boundary layer has been investigated using a high-resolution large-eddy simulation (LES). The boundary-layer thickness at the obstacle location is fixed, the…
The wake of a horizontal-axis wind turbine was studied at $Re_D=4\times10^6$ with the aim of revealing the effects of the tip speed ratio, $\lambda$, on the wake. Tip speed ratios of $4<\lambda<7$ were investigated and measurements were…
We designed and built a three degrees-of-freedom (DOF) flapping wing robot, Flapperoo, to study the aerodynamic benefits of wing folding and twisting. Forces and moments of this physical model are measured in wind tunnel tests over a…
The accurate prediction of aerothermal surface loading is of paramount importance for the design of high speed flight vehicles. In this work, we consider the numerical solution of hypersonic flow over a double-finned geometry,…
Aerodynamic force and flow structures of two airfoils in tandem configuration performing flapping motions are studied, using the method of solving the Navier-Stokes equations in moving overset grids. Three typical phase differences between…
A flexible sheet in uniform parallel flow is studied in order to quantify its fluid dynamic drag and fluid-elastic stability characteristics. An experimental campaign is undertaken that involves a cantilevered sheet in air flow…
We evaluate the effect of two experimental parameters on the slow dynamics of a Von-K\'arm\'an swirling flow driven by two propellers in a closed cylinder. The first parameter is the inertia mo- mentum of the propellers, and the second…
The paper is devoted to two-phase flow simulations and investigates the ability of a diffusive interface Cahn-Hilliard Volume-of-Fluid model to capture the dynamics of the air-sea interface at geophysically relevant Reynolds numbers. It…
Accurate prediction of wake dynamics behind hydrofoils is critical for mitigating vortex-induced vibrations and improving the performance of hydraulic machinery. Conventional turbulence modeling approaches often struggle to capture the…
A dual-step cylinder is comprised of a large diameter cylinder (D) with low aspect ratio (L/D) attached co-axially to the mid-span of a small diameter cylinder (d). The fluid dynamics video presented in this investigation is used to…
Interactional aerodynamics of a quadcopter in hover is numerically investigated in this study. The main objective is to understand major flow structures associated with unsteady airloads on multirotor aircraft. The overset mesh approach is…
Researchers have hypothesized that the post-stall lift benefit of bird's alular feathers, or alula, stems from the maintenance of an attached leading-edge vortex (LEV) over their thin-profiled, outer hand-wing. Here, we investigate the…
We investigate the dynamics and the stability of the incompressible flow past a corrugated dragonfly-inspired airfoil in the two-dimensional (2D) $\alpha-Re$ parameter space, where $\alpha$ is the angle of attack and $Re$ is the Reynolds…
This study investigates the effects of porosity on flying creatures such as dragonflies, moths, hummingbirds, etc. wing and shows that pores can affect wing performance. These studies were performed by 3D porous flapping wing flow analyses…
The present research aims to enhance the efficiency of a DTU-10MW Horizontal Axis Wind Turbine (HAWT) via Active Flow Control (AFC) implementation and using Synthetic Jets (SJ). In the initial part of the study the flow around two airfoil…
The planar laminar flow resulting from the impingement of two gaseous jets of different density issuing into an open space from aligned steadily fed slot nozzles of semi-width $R$ separated a distance $2H$ is investigated by numerical and…
We compare three different methodologies for simulation of turbulent flow past a vertical axis wind turbine: (i) full resolution of the turbine blades in a Direct Finite Element Simulation (DFS), (ii) implicit representation of the turbine…
This short article describes flow parameters, numerical method, and animations of the fluid dynamics video "LES of an Inclined Jet into a Supersonic Turbulent Crossflow"…
The twin-nozzle jet in crossflow is a canonical flow structure in various engineering equipment, yet there are limited detailed studies focusing on its dynamical characteristics. In this study, the flow field of a twin-nozzle jet in…
Airfoils pitching in the stalled regime have been of keen interest in recent years due to their desirable aerodynamic force characteristics. In this study, we are numerically investigating the unsteady flow past a NACA 0012 airfoil under…