Related papers: Perpendicular magnetic tunnel junctions with multi…
As an emerging non-volatile memory technology, magnetic random access memory (MRAM) has key features and advantages including non-volatility, high speed, endurance, low power consumption and radiation tolerance. Conventional MRAM utilizes…
Spinel MgAl2O4 and family oxides are emerging barrier materials useful for magnetic tunnel junctions (MTJs). We report large tunnel magnetoresistance (TMR) ratios up to 429% at room temperature (RT) and 1,034% at 10 K in a…
Magnetite (Fe3O4) based tunnel junctions with turret/mesa structure have been investigated for different barrier materials (SrTiO3, NdGaO3, MgO, SiO2, and Al2O(3-x)). Junctions with a Ni counter electrode and an aluminium oxide barrier…
Naturally random devices that exploit ambient thermal noise have recently attracted attention as hardware primitives for accelerating probabilistic computing applications. One such approach is to use a low barrier nanomagnet as the free…
A ferroelectric tunnel barrier in between two ferromagnetic electrodes (multiferroic tunnel junction, MFTJ), is one of the most promising concepts for future microelectronic devices. In parallel, Hafnia based ferroelectrics are showing…
We studied polycrystalline B2-type Co2FeAl (CFA) full-Heusler alloy based magnetic tunnel junctions (MTJs) fabricated on a Si/SiO2 amorphous substrate. Polycrystalline CFA films with a (001) orientation, a high B2 ordering, and a flat…
We consider a new type of magnetic tunnel junction, which consists of two ferromagnetic tunnel barriers acting as spin filters (SFs), separated by a nonmagnetic metal (NM) layer. Using the transfer matrix method and the free-electron…
We report on room temperature magnetoresistance and low frequency noise in sub-100nm elliptic CoFeB/MgO/CoFeB magnetic tunnel junctions with ultrathin (0.9nm) barriers. For magnetic fields applied along the hard axis, we observe current…
Temperature- and bias voltage-dependent transport measurements of magnetic tunnel junctions (MTJs) with perpendicularly magnetized Co/Pd electrodes are presented. Magnetization measurements of the Co/Pd multilayers are performed to…
In spintronics, one of the long standing questions is why the MgO-based magnetic tunnel junction (MTJ) is almost the only option to achieve a large tunnelling magnetoresistance (TMR) ratio at room temperature (RT) but not as large as the…
We demonstrate tunnel magnetoresistance (TMR) junctions based on a tri layer system consisting of an epitaxial NiMnSb, aluminum oxide and CoFe tri layer. The junctions show a tunnelling magnetoresistance of Delta R/R of 8.7% at room…
We study the evolution of perpendicularly magnetized tunnel junctions under 300 to 400 $^{\circ}$C annealing. The hysteresis loops do not evolve much during annealing and they are not informative of the underlying structural evolutions.…
Heusler alloys based magnetic tunnel junctions can potentially provide high magnetoresistance, small damping and fast switching. Here junctions with Co2FeAl as a ferromagnetic electrode are fabricated by room temperature sputtering on…
We investigate transport through 6 to 10 nm thin epitaxial GaAs(001) barriers sandwiched between polycrystalline iron films. Apart from a pronounced tunneling magnetoresistance effect (TMR) at low magnetic fields we observe a distinct…
Magnetic Tunnel Junctions whose basic element consists of two ferromagnetic electrodes separated by an insulating non-magnetic barrier have become intensely studied and used in non-volatile spintronic devices. Since ballistic tunnel of…
Magnetic tunnel junctions with the layer sequence Co$_2$Cr$_{0.6}$Fe$_{0.4}$Al/MgO/CoFe were fabricated by magnetron sputtering at room temperature (RT). The samples exhibit a large inverse tunneling magnetoresistance (TMR) effect of up to…
Magnetic materials that possess large bulk perpendicular magnetic anisotropy (PMA) are essential for the development of magnetic tunnel junctions (MTJs) used in future spintronic memory and logic devices. The addition of an…
We investigate spin-dependent conductance across a magnetic tunnel junction (MTJ) including a ferromagnetic insulating barrier. The MTJ consists of two half-metallic ferromagnetic La2/3Sr1/3MnO3 (LSMO) manganites as electrodes and La2NiMnO6…
Magnetic tunnel junctions (MTJs), composed of two ferromagnetic electrodes separated by a thin insulating barrier layer, are currently used in spintronic devices, such as magnetic sensors and magnetic random access memories. Recently,…
We have fabricated nanoscale magnetic tunnel junctions (MTJs) with an additional fixed magnetic layer added above the magnetic free layer of a standard MTJ structure. This acts as a second source of spin-polarized electrons that, depending…