Related papers: Radio-frequency C-V measurements with sub-attofara…
Dielectric resonators are employed to build state-of-the-art low-noise and high- stability oscillators operating at room and cryogenic temperatures. A resonator temperature coefficient of frequency is one criterion of performance. This…
High-stress Si$_3$N$_4$ nanoresonators have become an attractive choice for electro- and optomechanical devices. Membrane resonators can achieve quality factor ($Q$) - frequency ($f$) products exceeding $10^{13}$ Hz, enabling (in principle)…
Near-field radiative heat transfer (NFHT) research currently suffers from an imbalance between numerous theoretical studies, as opposed to experimental reports that remain, in proportion, relatively scarce. Existing experimental platforms…
Performance of superconducting resonators, particularly cavities for particle accelerators and micro cavities and thin film resonators for quantum computations and photon detectors has been improved substantially by recent materials…
We performed radiofrequency (RF) reflectometry measurements at 2.4 GHz on electrolyte-gated graphene field-effect transistors (GFETs) utilizing a tunable stub-matching circuit for impedance matching. We demonstrate that the gate voltage…
We report a two-stage, heterodyne rf-to-microwave transducer that combines a tunable electrostatic pre-amplifier with a superconducting electromechanical cavity. A metalized Si$_3$N$_4$ membrane (3 MHz frequency) forms the movable plate of…
Several experiments have recently reported on gate-tunable superconducting properties in metallic devices, holding promise for the realization of cryogenic switches, tunable resonators, and superconducting logic. In particular, the…
In superconducting quantum processors, the predictability of device parameters is of increasing importance as many labs scale up their systems to larger sizes in a 3D-integrated architecture. In particular, the properties of superconducting…
Electrical readout of spin qubits requires fast and sensitive measurements, but these are hindered by poor impedance matching to the device. We demonstrate perfect impedance matching in a radio-frequency readout circuit, realized by…
We present measurements and simulations of superconducting Nb co-planar waveguide resonators on sapphire substrate down to millikelvin temperature range with different readout powers. In the high temperature regime, we demonstrate that the…
Capacitance-voltage characteristics of individual germanium nanowire field effect transistors were directly measured and used to assess carrier mobility in nanowires for the first time; thereby removing uncertainties in calculated mobility…
We report high-bandwidth charge sensing measurements using a GaAs quantum point contact embedded in a radio frequency impedance matching circuit (rf-QPC). With the rf-QPC biased near pinch-off where it is most sensitive to charge, we…
An increasing number of experiments require the use of ultrasensitive nanomechanical resonators. Relevant examples are the investigation of quantum effects in mechanical systems [1] or the detection of exceedingly small forces as in…
High-temperature superconductivity has a significant opportunity to improve the performance of nuclear magnetic resonance (NMR) spectroscopy and magnetic resonance imaging (MRI) systems. The low rf losses and low operating temperatures of…
We report the observation of novel behaviour in the radio frequency (rf) and microwave response of DyNi_2B_2C over a wide range of temperature (T) and magnetic field (H) in the antiferromagnetic (AFM) and superconducting (SC) states. At…
Recent studies on nanoscale field-effect sensors reveal the crucial importance of the low frequency noise for determining the ultimate detection limit. In this letter, the 1/f-type noise of Si nanoribbon field-effect sensors is…
The discovery of van der Waals superconductors in recent years has generated a lot of excitement for their potentially novel pairing mechanisms. However, their typical atomic-scale thickness and micrometer-scale lateral dimensions impose…
Utilizing tantalum (Ta) in superconducting circuits has led to significant improvements, such as high qubit lifetimes and quality factors in both qubits and resonators, underscoring the importance of material optimization in quantum device…
We demonstrate detection of proton NMR signals with a radio frequency atomic magnetometer tuned to the NMR frequency of 62 kHz. High-frequency operation of the atomic magnetometer makes it relatively insensitive to ambient magnetic field…
Recent years have seen great progress in our understanding of the electronic properties of nanomaterials in which at least one dimension measures less than 100 nm. However, contacting true nanometer scale materials such as individual…