Related papers: Radiation study of Lead Fluoride crystals
Defect engineering is applied to hybrid (CH$_3$NH$_3$)PbI$_3$ organic-inorganic perovskites. These materials have become one of the most promising low-cost alternatives to traditional semiconductors in the field of photovoltaics and light…
A 30-fs, 800 nm, 1 kHz femtosecond was used to photoablate diamond across radiant energy doses of 1 - 500 kJ/cm^2, with fluences of 10 - 50 J/cm^2 and, pulse counts from 100 to 10,000. The objective was to maximise material removal while…
Diamond is a material in use at many nuclear and high energy facilities due to its inherent radiation tolerance and ease of use. We have characterized detectors based on chemical vapor deposition (CVD) diamond before and after proton…
Fluorescent nuclear track detectors (FNTDs) based on Al${_2}$O${_3}$:C,Mg crystals are luminescent detectors that can be used for dosimetry and detection of charged particles and neutrons. These detectors can be utilised for imaging…
The absorption length, $\lambda_{abs}$, of light with wavelengths between 0.95 and 1.30$~\mu$m in silicon irradiated with 24$~$GeV/c protons to 1$~$MeV neutron equivalent fluences between 0 and $8.6 \times 10^{15}~$cm$^{-2}$ has been…
Periodic or gradient subwavelength structures are basic configurations of photonic crystals and metamaterials. The measured linear losses of those nanophotonic devices are well-beyond theoretical predictions. Nanofabrication related…
As part of an experiment to measure the spectrum of photons emitted in beta-decay of the free neutron, we developed and operated a detector consisting of 12 bismuth germanate (BGO) crystals coupled to avalanche photodiodes (APDs). The…
The electro-magnetic calorimeter at the BaBar detector, part of the asymmetric B Factory at SLAC, measures photons in the energy range from 20 MeV to 8 GeV with good resolution. The calorimeter is calibrated at the low energy end with 6.13…
The motivation for PF calorimetry is to experimentally measure the energy of hadron jets with excellent resolution. In particle flow designs, sigma(E)/E < 5% should be possible for a range of jet energies from 50 GeV to 250 GeV, important…
The radiation damage in optical materials mostly manifests itself as the loss of optical transmittance. The optical materials recover from radiation damage to some extent when the radiation exposure is stopped. The recovery is at a faster…
We report measurements of photon and neutron radiation levels observed while transmitting a 0.43 MW electron beam through millimeter-sized apertures and during beam-off, but accelerating gradient RF-on, operation. These measurements were…
Lutetium-Yttrium Orthosilicate doped with Cerium (LYSO:Ce), as a bright scintillating crystal, is a candidate for calorimetry applications in strong ionizing-radiation fields and large high-energy hadron fluences as are expected at the CERN…
In this paper we describe an experiment of efficient cooling of $^{87}$Rb atoms in two-frequency diffuse laser lights. Compared with single frequency diffuse light, two-frequency diffuse lights have wider velocity capture range and thus can…
We report on the behavior of CVD diamonds under intense electromagnetic radiation and on the response of the detector to high density of deposited energy. Diamonds have been found to remain unaffected after doses of 10 MGy of MeV-range…
Silicon carbide (SiC) planar PiN diodes from two different manufacturers were irradiated with 252.7 MeV protons from a medical synchrotron. Over the course of two 8h irradiation shifts, the samples were exposed to increasing fluences…
Radiation damage tests in hydrogenated amorphous silicon (a-Si:H) flexible flux and dose-measuring devices have been performed with a 3 MeV proton beam, to evaluate combined displacement and total ionizing dose damage. The tested devices…
Silicon detector technologies are often employed for high energy particle physics applications due to their excellent radiation hardness. Radiation damage in the form of bulk or substrate damage is dependent on the incident particle species…
The 75,848 lead tungstate crystals in CMS experiment at the CERN Large Hadron Collider are used to measure the energy of electrons and photons produced in the proton-proton collisions. The optical transparency of the crystals degrades…
Ferroelectric photovoltaic materials are an alternative to semiconductor-based photovoltaics and offer the advantage of above bandgap photovoltage generation. However, there are few known compounds, and photovoltaic efficiencies remain low.…
Polycrystalline solid-state ionic conductors (PolySSICs) are key energy materials for all-solid-state Li-ion batteries (LIBs). However, achieving room-temperature ionic conductivity comparable to that of liquid electrolytes ($\sigma \sim…