Related papers: Accuracy of Refractive Index Spectroscopy by Broad…
White light spectral interferometry is applied to measure the refractive index in absorbing liquids in the spectral range from 400 to 1000 nm. We analyze the influence of absorption on the visibility of interferometric fringes and,…
We design a spectrally resolved interferometer to measure the refractive index of transparent samples over a broad spectral range between 400 and 550 nm. The measuring device consists of a Michelson interferometer whose output is analysed…
Refractive index is a fundamental optical property of powder and a key input to the measurement of the size distribution using light scattering and the measurement of the absorption and scattering coefficients using diffuse reflectance…
Precise measurements of the geometrical thickness of a sample and its refractive index are important for materials science, engineering, and medical diagnosis. Among the possible non-contact evaluation methods, optical interferometric…
Determination of refractive index of micro-disks of a calcinated ($1100^\circ$C in air) photo-resist SZ2080$^\mathrm{TM}$ was carried out using transmission and reflection spectroscopy. Interference fringes at specific…
The refractive index of single microparticles is derived from precise measurement and rigorous modeling of the stiffness of a laser trap. We demonstrate the method for particles of four different materials with diameters from 1.6 to 5.2…
Two methods of refractometry in reflected light from optical surface of samples are considered and studied experimentally. Methods are grounded on results of Fresnel theory of concerning light reflectivity at near normal incidence and…
Highly-resolved determination of refractive index is vital in fields ranging from biosensing through to laser range-finding. Laser speckle is known to be a sensitive probe of the properties of the light and the environment, but to date…
The refractive index of novel organosilica (nano/micro)material is determined using two methods. The first method is based on analysis of optical extinction efficiency of organosilica beads versus wavelength, which is obtained by a standard…
We describe a high-speed interferometric method, using multiple angles of incidence and multiple wavelengths, to measure the absolute thickness, tilt, the local angle between the surfaces, and the refractive index of a fluctuating…
Long cylinders, such as optical fibers, are some of the most widely used photonic devices. The radius and refractive index of these fibers are therefore fundamentally important parameters in determining their performance. We have developed…
A novel method is proposed to measure the refractive indices (RIs) of the materials of different transparent solid state media. To exploit the advantage of non-contact measurement laser beam interferometry is used as an effective technique…
We present a robust, precise, and accurate method to simultaneously measure the refractive indices of two transparent materials within an interference coating. This is achieved by measuring both a photometrically accurate transmittance…
With the development of terahertz time-domain spectroscopy, methods have been proposed to precisely estimate the thickness, refractive index, and attenuation coefficient of a sample. In this article, we propose a new method to compute these…
Materials combining both a high refractive index and a wide band gap are of great interest for optoelectronic and sensor applications. However, these two properties are typically described by an inverse correlation with high refractive…
The refraction of light in an optical medium is not only a subject of fundamental interest, but the refractive index also plays a crucial role in applications involving integrated and non-linear optics. One such application is photon-pair…
Backscatter limits many interferometric measurements, including gravitational wave detectors, by creating spurious interference. We describe an experimental method to directly and quantitatively measure the backscatter interference. We…
We developed a phase correction method for broadband terahertz time-domain spectroscopy in reflection geometry, which allows us to obtain quantitative and accurate values for the complex refractive index of materials. The process is…
For the investigation of two-component aerosols one needs to know the refractive indices of the two aerosol components. One problem is that they depend on temparature and pressure, so one needs for their determination a robust measurement…
Using the Cryogenic, High-Accuracy Refraction Measuring System (CHARMS) at NASA's Goddard Space Flight Center, we have measured the absolute refractive index of five specimens taken from a very large boule of Corning 7980 fused silica from…