Related papers: Standalone micro-reformer for on-board hydrogen pr…
Photoelectrochemical (PEC) water splitting offers an elegant approach for solar energy conversion into hydrogen fuel. Large-scale hydrogen production requires stable and efficient photoelectrodes and scalable PEC cells that are fitted for…
A programmable micromechanical resonator based on a VO2 thin film is reported. Multiple mechanical eigenfrequency states are programmed using Joule heating as local power source, gradually driving the phase transition of VO2 around its…
The catalytic reduction of $\mathrm{CO_{2}/CO}$ is an appealing approach for reducing greenhouse gas concentrations while also producing renewable energy. We used two-dimensional transitional metal carbides known as Mxenes as the most…
We present electrothermal microelectromechanical (MEMS) actuators as a practical platform for straining 2D materials. The advantages of the electrothermal actuator is its high output force and displacement for low input voltage, but its…
In an effort to develop breakthrough technologies that enable drastic reduction in CO2 emissions from steel industry (ULCOS project), the reduction of iron ore by pure hydrogen in a direct reduction shaft furnace was investigated. After…
Redox flow batteries (RFBs) have gained popularity as large-scale energy storage systems for wind and solar powered grids. Modern RFB systems are based on highly corrosive and/or flammable electrolytes. Organic redox active species for RFBs…
MXenes are promising candidates for electrochemical applications due to their high conductivity, tunable surface chemistry, and catalytic potential. However, their use in bulk electrode form remains unexplored despite advantages such as…
Active and reliable electrocatalysts are fundamental to renewable energy technologies. PdCoO2 has recently been recognized as a promising catalyst template for the hydrogen evolution reaction (HER) in acidic media thanks to the formation of…
We present design, fabrication and characterization of a MEMS VCSEL which utilizes a silicon-on-insulator wafer for the microelectromechanical system and encapsulates the MEMS by direct InP wafer bonding, which improves the protection and…
Wearable electronic devices and gadgets raise the need for flexible, thin and lightweight batteries. In this article we present for the first time, a unique, single-step method for the preparation of a membrane-electrode assembly for…
Micro-solid oxide fuel cells based on thin films have strong potential for use in portable power devices. However, devices based on silicon substrates typically involve thin-film metallic electrodes which are unstable at high temperatures.…
The increase in the number of readout channels in new detectors, like the Micro Pattern Gas Detectors (MPGD), in the order of several millions, requires a large amount of electrical power to supply the front-end electronics, up to hundreds…
One pot synthetic technique was used to synthesize mesoporous fullerene using highly ordered mesoporous template such as KIT6-150 and SBA-15-150. Highly ordered porous fullerene with cross linkage between the fullerene molecules was…
We report in this paper the design, fabrication and experimental characterization of a piezoelectric MEMS microgenerator. This device scavenges the energy of ambient mechanical vibrations characterized by frequencies in the range of 1 kHz.…
Membrane-electrode-assembly (MEA) cells with copper (Cu) cathodes show strong potential for electrochemical CO2 reduction to ethylene (C2H4), but achieving high C2H4 selectivity remains a challenge due to competing hydrogen evolution. This…
Efficient artificial photosynthesis systems are currently realized as catalyst- and surfacefunctionalized photovoltaic tandem- and triple-junction devices, enabling photoelectrochemical (PEC) water oxidation while simultaneously recycling…
The partial oxidation of methane was investigated using a self-stirred reactor under a wide range of operating conditions. The recation mechanism was determined by comparing ecperimental results with the results of simulations made using…
Singular beams have attracted great attention due to their optical properties and broad applications from light manipulation to optical communications. However, there has been a lack of practical schemes with which to achieve switchable…
$\textit{In situ}$ environmental transmission electron microscopy (ETEM) is a powerful tool for observing structural modifications taking place in heterogeneous catalysts under reaction conditions. However, to strengthen the link between…
Twelve single chambered, air-cathode Tubular Microbial Fuel Cells (TMFCs) have been filled up with fruit and vegetable residues. The anodes were realized by means of a carbon fiber brush, while the cathodes were realized through a…