Twelve single chambered, air-cathode Tubular Microbial Fuel Cells (TMFCs) have been filled up with fruit and vegetable residues. The anodes were realized by means of a carbon fiber brush, while the cathodes were realized through a graphite-based porous ceramic disk with Nafion membranes (117 Dupont). The performances in terms of polarization curves and power production were assessed according to different operating conditions: percentage of solid substrate water dilution, adoption of freshwater and a 35mg/L NaCl water solution and, finally, the effect of an initial potentiostatic growth. All TMFCs operated at low pH (pH=3.0±0.5), as no pH amendment was carried out. Despite the harsh environmental conditions, our TMFCs showed a Power Density (PD) ranging from 20 to 55~mW/m2⋅kgwaste and a maximum CD of 20~mA/m2⋅kgwaste, referred to the cathodic surface. COD removal after a 28−day period was about 45%. The remarkably low pH values as well as the fouling of Nafion membrane very likely limited TMFC performances. However, a scale-up estimation of our reactors provides interesting values in terms of power production, compared to actual anaerobic digestion plants. These results encourage further studies to characterize the graphite-based porous ceramic cathodes and to optimize the global TMFC performances, as they may provide a valid and sustainable alternative to anaerobic digestion technologies.
@article{arxiv.1611.02735,
title = {Low pH, high salinity: too much for Microbial Fuel Cells?},
author = {Nicole Jannelli and Rosa Anna Nastro and Viviana Cigolotti and Mariagiovanna Minutillo and Giacomo Falcucci},
journal= {arXiv preprint arXiv:1611.02735},
year = {2016}
}