Related papers: Quantifying residual stress in Helium implanted su…
Cyclic thermal loads imposed on a W divertor by strikepoint sweeping may induce low-cycle thermal fatigue cracking of its plasma-facing surfaces. This cracking may be accelerated by plasma-material interactions such as H implantation,…
A concentration-saturated helium mixture at the melting pressure consists of two liquid phases and one or two solid phases. The equilibrium system is univariant, whose properties depend uniquely on temperature. Four coexisting phases can…
A scanning helium microscope typically utilises a thermal energy helium atom beam, with an energy and wavelength (<100 meV, ~0.05 nm) particularly sensitive to surface structure. An angular detector stage for a scanning helium microscope is…
The accumulation of helium bubbles at grain boundaries (GBs) critically degrades the mechanical integrity of structural materials in nuclear reactors. While GBs act as sinks for radiation-induced defects, their inherent structural…
Subjected to compressive stresses, soft polymers with stiffness gradients can display various buckling patterns. These compressive stresses can have different origins, like mechanical forces, temperature changes, or, for hydrogel materials,…
In this Letter, we consider the role played by the sedimentation of helium nuclei on the emissivity and metallicity distribution of the X-ray emitting plasma in the cores of relaxed galaxy clusters. We model the gas density and temperature…
Using X-ray micro-diffraction and surface acoustic wave spectroscopy, we measure lattice swelling and elastic modulus changes in a W-1%Re alloy after implantation with 3110 appm of helium. A fraction of a percent observed lattice expansion…
The assumption of a spatially uniform helium distribution in the intracluster medium can lead to biases in the estimates of key cluster parameters if composition gradients are present. The helium concentration profile in galaxy clusters is…
Ion beam plays a pivotal role in ion implantations and the fabrication of nanostructures. However, there lacks a quantitative model to describe the residual stresses associated with the ion-beam radiation. Radiation-induced residual…
Copper and hydrogen are among the most common elements that are widely used in industrial and fundamental research applications. Copper surfaces are often exposed to hydrogen in the form of charged ions. The hydrogen ions can accelerate…
The effect of surface stress on the stiffness of cantilever beams remains an outstanding problem in the physical sciences. While numerous experimental studies report significant stiffness change due to surface stress, theoretical…
We report an experimental study of the drying-induced peeling of a bilayer, consisting of an elastomeric disk coated with a suspension of nanoparticles. We show that although capillary forces associated with the scale of the droplet can not…
Materials used to study nuclear fusion can retain atmospheric helium unless pretreated before an experiment. Understanding helium outgassing is important for accurate diagnostics in experiments surrounding nuclear fusion. The presence of…
Residual stress and plastic strain in additive manufactured materials can exhibit significant microscopic variation at the powder scale, profoundly influencing the overall properties of printed components. This variation depends on…
This work aims to identify common challenges in the preparation of the blister test devices designed for measurement of energy release rate for brittle thin films and to propose easy-to-implement solutions accordingly. To this end, we…
We introduce a model for hydrogen induced blister formation in nanometer thick thin films. The model assumes that molecular hydrogen gets trapped under a circular blister cap causing it to deflect elastically outward until a stable blister…
Contacts between particles in dense, sheared suspensions are believed to underpin much of their rheology. Roughness and adhesion are known to constrain the relative motion of particles, and thus globally affect the shear response, but an…
We describe the design, characterization and application of a simple, highly collimated and compact atomic/molecular beam source. This source is based on a segmented capillary design, constructed using a syringe needle. Angular width…
We investigate numerically the quantum collision between a stable Helium nanodrop and an infinitely hard wall in one dimension. The scattering outcome is compared to the same event omitting the quantum pressure. Only the quantum process…
Blisters are commonly observed when an adhesive sheet is carelessly deposited on a plate. Although such blisters are usually not desired for practical applications, we show through model experiments on angular blisters how material…