Related papers: Processing of nanostructured bulk Fe-Cr alloys by …
Recent studies of FeMnCoCr-based high entropy alloys have demonstrated uncommon deformation behaviors such as transformation-induced plasticity, which were largely believed to be restricted to select families of steels. Coupled with the…
The phase stability of fcc and bcc magnetic binary Fe-Cr, Fe-Ni, Cr-Ni alloys and ternary Fe-Cr-Ni alloys is investigated using a combination of density functional theory (DFT), Cluster Expansion (CE) and Magnetic Cluster Expansion (MCE).…
In this article, we combine casting experiments and quantitative simulations to present a novel multiscale modeling approach to predict local primary dendritic spacings in metallic alloys solidified in conditions relevant to industrial…
We aim to investigate relationships between select processing parameters or inputs (composition, temperature, annealing time) and two structural parameters, specifically, the mean radius and volume fraction of the Fe$_3$Si nanocrystals. To…
The mechanical properties and deformation mechanisms of Cu/Nb nanoscale metallic multilayers (NMMs) manufactured by accumulative roll bonding (ARB) are studied at 25C and 400C. Cu/Nb NMMs with individual layer thicknesses between 7 and 63…
Fe$_2$P alloys have been identified as promising candidates for magnetic refrigeration at room-temperature and for custom magnetostatic applications. The intent of this study is to accurately characterize the magnetic ground state of the…
Zinc-ion batteries are promising alternatives to lithium-ion batteries, offering advantages in safety, cost, and environmental impact. However, their performance is often limited by the functioning of the zinc anode. This study employs…
Deformation heterogeneities within microstructures of polycrystalline shape memory alloys (SMAs) during superelastic stressing are studied using both experiments and simulations. In situ X-ray diffraction, specifically the far-field high…
It is well known that the twinning is an important mode of plastic deformation in nanocrystalline materials. As a result, it is expected that the twin can interact with different grain boundaries (GBs) during the plastic deformation.…
High pressure torsion (HPT) is one of the ways to form nanostructured materials with high strength properties. However, HPT hardening mechanisms vary from material to material and are poorly understood for some BCC metals, particularly…
Nanodiamond reinforced silver matrix nanocomposites with different nanodiamond content are produced from pure silver and nanodiamond powders by a combination of two severe plastic deformation methods, ball-milling and high-pressure torsion…
Plastic deformation mechanisms have been investigated in the MAX phase Ti2AlN. Nanoindentation has been used to induce plastic deformation in a single grain, and a Transmission Electron Microscopy (TEM) lamella has been extracted in cross…
A mesoscale study of a single crystal nickel-base superalloy subjected to an industrially relevant process simulation has revealed the complex interplay between microstructural development and the micromechanical behaviour. As sample gauge…
Under plastic flow, multi-element high/medium-entropy alloys (HEAs/MEAs) commonly exhibit complex intermittent and collective dislocation dynamics owing to inherent lattice distortion and atomic-level chemical complexities. Using atomistic…
The influence of solute atoms (Al and Zn) on the deformation mechanisms and the critical resolved shear stress for basal slip in Mg alloys at 298 K and 373 K was ascertained by micropillar compression tests in combination with…
Aluminum-Copper (Al-Cu) alloys are essential materials for weight reduction critical structures in the aerospace and automotive industries, yet achieving their maximum ultrahigh-strength potential remains limited by nanoscale defect control…
Practical applications of nanocrystalline metallic thin films are often limited by instabilities. In addition to grain growth, the thin film itself can become unstable and collapse into islands through solid-state dewetting. Selective…
Magnesium (Mg) and its alloys hold great potential as an energy-saving structural material for automative, aerospace applications. However, the use of Mg alloys has been limited due to poor ductility and formability. Poor mechanical…
High-entropy alloys (HEAs) stand out between multi-component alloys due to their attractive microstructures and mechanical properties. In this investigation, molecular dynamics (MD) simulation and machine learning were used to ascertain the…
In this communication we present a study of the electronic structure of partially disordered bulk and (100) thin film of quaternary pseudo-Heusler alloy Co$_2$Fe$_{0.4}$Cr$_{0.6}$Al in the L2$_1$ phase using the Augmented Space recursion…