Related papers: Processing of nanostructured bulk Fe-Cr alloys by …
Concentrated solid solution alloys (CSAs) have attracted attention for their promising properties; however, current manufacturing methods face challenges in complexity, high costs, and limited scalability, raising concerns about industrial…
In the framework of the suggested in [arxiv:1803.08247 [cond-mat.mtrl-sci]] statistical theory of the equilibrium flow stress, including yield strength, ${\sigma}_y$, of polycrystalline materials under quasi-static (in case of tensile…
Nanocrystalline materials are well known for their beneficial mechanical and physical properties. However, it is of utmost importance to stabilize the microstructure at elevated temperatures to broaden the window of application e.g. by…
We present a computational framework for the simulations of powder-bed fusion of metallic alloys, which combines: (1) CalPhaD calculations of temperature-dependent alloy properties and phase diagrams, (2) macroscale finite element (FE)…
Thin-film solid-state metal dealloying (thin-film SSMD) is a promising method for fabricating nanostructures with controlled morphology and efficiency, offering advantages over conventional bulk materials processing methods for integration…
In many mechanical, electrical, and general physical systems evolving over time or space, spectral analysis methods as Fast Fourier Transform (FFT), Short Term Fourier Transform (STFT), Power Spectrum Density (PSD) plays a very important…
A simple route to prepare Gd$_{0.7}$Sr$_{0.3}$MnO$_3$ nanoparticles by ultrasonication of their bulk powder materials is presented in this article. For comparison, Gd$_{0.7}$Sr$_{0.3}$MnO$_3$ nanoparticles are also prepared by ball milling.…
Here, we report the synthesis and physical properties of Co2FeGe (CFG) Heusler alloy (HA) nanoparticles (NPs). The NPs of size 23 nm are prepared using the co-precipitation method. X-ray and selected area electron diffraction patterns have…
Fission of doubly charged metal clusters is studied using the open-shell two-center deformed jellium Hartree-Fock model and Local Density Approximation. Results of calculations of the electronic structure and fission barriers for the…
The universal generalising approach for non-isothermal behaviour of different alloys has been provided together with the novel deformation modelling. Strong correlation between the model approach and experimental results is shown that…
Plastic deformation of metallic alloys usually takes place through slip, but occasionally involves twinning. In particular, twinning is important in hexagonal close packed materials where the easy slip systems are insufficient to…
We performed neutron imaging of ferromagnetic transitions in Ni$_3$Al and HgCr$_2$Se$_4$ crystals. These neutron depolarization measurements revealed bulk magnetic inhomogeneities in the ferromagnetic transition temperature with spatial…
Fe-based shape memory alloys (Fe-SMAs) belong to smart metallic materials that can memorize or restore their preset shape after experiencing a substantial amount of deformation under heat, stress, or magnetic stimuli. Fe-SMAs have…
This work addresses the two great challenges of the spark plasma sintering (SPS) process: the sintering of complex shapes and the simultaneous production of multiple parts. A new controllable interface method is employed to concurrently…
Applying focused ion beam (FIB) nanotomography and Rutherford backscattering spectroscopy (RBS) to dealloyed platinum-aluminum thin films an in-depth analysis of the dominating physical mechanisms of porosity formation during the dealloying…
An ultrafine grained magnesium alloy has been produced through room temperature high-pressure torsion (HPT) of solutionised Mg-1.35 wt.%Mn. Dynamic precipitation of nanometer-scale Mn particles occurred during deformation. These particles…
We report on the perpendicular magnetic anisotropy (PMA) behavior of heavy metal (HM)/ Fe alloy/MgO thin film heterostructures after an ultrathin HfO2 passivation layer is inserted between the Fe alloy and the MgO. This is accomplished by…
The mechanical properties and microstructural evolution of a medium-entropy alloy Co$_{17.5}$Cr$_{12.5}$Fe$_{55}$Ni$_{10}$Mo$_{5}$ (at%) in a low temperature range (including the record low temperatures region down to 0.5 K) were…
As structural and functional materials, topologically close-packed (TCP) phases of transition metal compounds offer a wide range of attractive properties. Due to their complex crystal structure and the resulting brittleness, the knowledge…
In large area micro hot embossing, the process temperature plays a critical role to both the local fidelity of microstructure formation and global uniformity. The significance of low temperature hot embossing is to improve global flatness…